On 13/03/2019, Stanislaw Gruszka <[email protected]> wrote: > On Tue, Mar 12, 2019 at 08:11:42PM +0100, Tomislav Požega wrote: >> MFP can work with enabled HW crypt engine, but in this case >> available bandwidth is reduced at least when connecting to >> Archer C7 (QCA9558). Enable the feature for known to work chipsets- >> MT7620, RT3070 and RT5390. Userspace setting for ieee80211w should >> default to 0 in order to prevent unintentional bandwidth drop. >> >> Signed-off-by: Tomislav Po?ega <[email protected]> >> --- >> drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 +++++++---- >> 1 files changed, 7 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c >> b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c >> index a03b528..bb8204d 100644 >> --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c >> +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c >> @@ -9326,6 +9326,13 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev >> *rt2x00dev) >> ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); >> ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); >> >> + /* Experimental: Set MFP with HW crypto enabled. */ >> + if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT5390) || >> + rt2x00_rt(rt2x00dev, RT6352)) >> + ieee80211_hw_set(rt2x00dev->hw, MFP_CAPABLE); > > Is not that we support MFP in hardware. We just return -EOPNOTSUPP > in rt2x00mac_set_key() when mac80211 will try to set MFP ciphers > (since rt2x00crypto_key_to_cipher() will return CIPHER_NONE) and > we fallback to software encryption. > > Please repost patch that enable MFP unconditionally with > 'Cc: [email protected]' tag. > > Stanislaw >
No, I have not test any other chipsets besides the ones I enabled it for. It is possible this would cause problems on other devices, so just enable it for the known to work ones.
