On Tue, Mar 26, 2019 at 02:54:25AM +0100, Tom Psyborg wrote: > On 25/03/2019, Stanislaw Gruszka <[email protected]> wrote: > > On Thu, Mar 14, 2019 at 03:02:14PM +0100, Tom Psyborg wrote: > >> On 13/03/2019, Stanislaw Gruszka <[email protected]> wrote: > >> > >> > > >> > There should be no difference between enabling MFP with nohwcrypt and > >> > without nohwcrypt, > >> > >> well there is. do you still want me to resend this with MFP enabled > >> unconditionally for all chips? > > > > Please share your hostapd config file with MFP enabled. > > > > Stanislaw > > > > > > ctrl_interface=/var/run/wpa_supplicant > eapol_version=1 > ap_scan=1 > fast_reauth=1 > pmf=2 > network={ > ssid="OpenWrt" > proto=WPA2 > key_mgmt=WPA-PSK > pairwise=CCMP > group=CCMP > ieee80211w=2 > psk="u7e5hwh46uz7ergv" > wpa_ptk_rekey=60 > }
This is supplicant config, I asked for hostapd. You can find it in /tmp/run/hostapd-phy0.conf (I assume you use openwrt on QCA router, or you use proprietary firmware ?). Stanislaw
