> On Thu, Jun 13, 2019 at 11:43:11PM +0200, Lorenzo Bianconi wrote:
> > Commit f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes
> > for rx") breaks A-MSDU support. When A-MSDU is enable the device can
> > receive frames up to q->buf_size but they will be discarded in
> > mt76u_process_rx_entry since there is no enough room for
> > skb_shared_info. Fix the issue reallocating the skb and copying in the
> > linear area the first 128B of the received frames and in the frag_list
> > the remaining part.
> >
> > Fixes: f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for
> > rx")
> > Signed-off-by: Lorenzo Bianconi <[email protected]>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > drivers/net/wireless/mediatek/mt76/usb.c | 49 ++++++++++++++++++-----
> > 2 files changed, 41 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > index 8ecbf81a906f..889b76deb703 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > @@ -30,6 +30,7 @@
> > #define MT_TX_RING_SIZE 256
> > #define MT_MCU_RING_SIZE 32
> > #define MT_RX_BUF_SIZE 2048
> > +#define MT_SKB_HEAD_LEN 128
> >
> > struct mt76_dev;
> > struct mt76_wcid;
> > diff --git a/drivers/net/wireless/mediatek/mt76/usb.c
> > b/drivers/net/wireless/mediatek/mt76/usb.c
> > index bbaa1365bbda..12d60d31cb51 100644
> > --- a/drivers/net/wireless/mediatek/mt76/usb.c
> > +++ b/drivers/net/wireless/mediatek/mt76/usb.c
> > @@ -429,6 +429,45 @@ static int mt76u_get_rx_entry_len(u8 *data, u32
> > data_len)
> > return dma_len;
> > }
> >
> > +static struct sk_buff *
> > +mt76u_build_rx_skb(u8 *data, int len, int buf_size)
> > +{
> > + struct sk_buff *skb;
> > +
> > + if (SKB_WITH_OVERHEAD(buf_size) < MT_DMA_HDR_LEN + len) {
> > + struct page *page;
> > + int offset;
> > +
> > + /* slow path, not enough space for data and
> > + * skb_shared_info
> > + */
> > + skb = alloc_skb(MT_SKB_HEAD_LEN, GFP_ATOMIC);
> > + if (!skb)
> > + return NULL;
> > +
> > + skb_put_data(skb, data + MT_DMA_HDR_LEN, MT_SKB_HEAD_LEN);
>
> I looked how rx amsdu is processed in mac80211 and it is decomposed and
> copied into newly allocated individual skb's, see ieee80211_amsdu_to_8023s()
>
> So copy L3 & L4 headers doesn't do anything good here, actually seems to
> be better to have them in frag as __ieee80211_amsdu_copy_frag() do some
> magic to avid copy.Looking at __ieee80211_amsdu_copy() now I got why other drivers copy hdrlen + 8, thx :) In our case reuse_frag is true in __ieee80211_amsdu_copy, so we will end up copying 32B + ether_len. Anyway I think 32 is a little bit too low and we could get better performances increasing it a little bit. A typical use case (e.g IPv6 + TCP): IPv6 = 40B, TCP = 32B --> so 72B..I guess 128B is a good value :) @Felix, Johannes: what do you think? Regarding the patch I guess let's apply it as it is in order to fix the pending issue and then we will figure out how to proceed (copy hdr_len + 3 or increase the value in __ieee80211_amsdu_copy) Regards, Lorenzo > > Stanislaw
signature.asc
Description: PGP signature
