<[email protected]> wrote: > From: Yan-Hsuan Chuang <[email protected]> > > After firmware has been downloaded, driver should send > some information to it through H2C commands. Those H2C > commands are transmitted through TX path. > > But before HCI has been started, the TX path is not > working completely. Such as PCI interfaces, the interrupts > are not enabled, hence TX interrupts will not be issued > after H2C skb has been DMAed to the device. And the H2C > skbs will not be released until the device is powered off. > > Signed-off-by: Yan-Hsuan Chuang <[email protected]>
This didn't apply. Please rebase on top of wireless-drivers, mark this as "[PATCH 5.4 v2]" and resend. fatal: sha1 information is lacking or useless (drivers/net/wireless/realtek/rtw88/mac.c). error: could not build fake ancestor Applying: rtw88: configure firmware after HCI started Patch failed at 0001 rtw88: configure firmware after HCI started The copy of the patch that failed is found in: .git/rebase-apply/patch Patch set to Changes Requested. -- https://patchwork.kernel.org/patch/11146411/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
