This patch is to add scc/cfg meta to build and boot zcu102 board with the bsp of xilinx-zynqmp.
Signed-off-by: Zumeng.Chen <zumeng.c...@windriver.com> --- bsp/xilinx-zynqmp/xilinx-zynqmp-standard.scc | 8 + bsp/xilinx-zynqmp/xilinx-zynqmp.cfg | 227 +++++++++++++++++++++++++++ bsp/xilinx-zynqmp/xilinx-zynqmp.scc | 7 + 3 files changed, 242 insertions(+) create mode 100644 bsp/xilinx-zynqmp/xilinx-zynqmp-standard.scc create mode 100644 bsp/xilinx-zynqmp/xilinx-zynqmp.cfg create mode 100644 bsp/xilinx-zynqmp/xilinx-zynqmp.scc diff --git a/bsp/xilinx-zynqmp/xilinx-zynqmp-standard.scc b/bsp/xilinx-zynqmp/xilinx-zynqmp-standard.scc new file mode 100644 index 0000000..23dd874 --- /dev/null +++ b/bsp/xilinx-zynqmp/xilinx-zynqmp-standard.scc @@ -0,0 +1,8 @@ +define KMACHINE xilinx-zynqmp +define KTYPE standard +define KARCH arm64 + +include ktypes/standard/standard.scc +branch xilinx-zynqmp + +include xilinx-zynqmp.scc diff --git a/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg b/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg new file mode 100644 index 0000000..e292366 --- /dev/null +++ b/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg @@ -0,0 +1,227 @@ +#......................................................................... +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# consult the product documentation. +# +#......................................................................... + + +CONFIG_ARM64=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_ARM64_4K_PAGES=y +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_HOTPLUG_CPU=y + +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCIE_XILINX_NWL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_XDMA_PL=y + +#CPU ilde and freq +CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y + +# CAN Device Drivers +# +CONFIG_CAN=y +CONFIG_CAN_DEV=y +CONFIG_CAN_XILINXCAN=y + +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +# CONFIG_JFFS2_FS_WRITEBUFFER is not set +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set + +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_AHCI_CEVA=y +CONFIG_NETDEVICES=y + +CONFIG_OF=y +CONFIG_OF_MDIO=y +CONFIG_ETHERNET=y +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_MACB_EXT_BD=y + +CONFIG_PHYLIB=y +CONFIG_XILINX_PHY=y + +CONFIG_PHY_XILINX_ZYNQMP=y +CONFIG_FIXED_PHY=y +CONFIG_DEVMEM=y + +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# +CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_MUX_REG +CONFIG_I2C_CADENCE=y +CONFIG_I2C_XILINX=y +CONFIG_EEPROM_AT24=y + + +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_CADENCE=y +CONFIG_SPI_XILINX=y +CONFIG_SPI_ZYNQMP_GQSPI=y + +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_ZYNQ=y + +CONFIG_POWER_RESET=y +CONFIG_SENSORS_INA2XX=y +CONFIG_WATCHDOG=y +CONFIG_CADENCE_WATCHDOG=y +CONFIG_XILINX_WATCHDOG=y + +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_OTG=y +CONFIG_USB_OTG_FSM=m +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_XILINX=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m + +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y + +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_SYNOPSYS=y +CONFIG_EDAC_ZYNQMP_OCM=y + +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_DRV_ZYNQMP=y + +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_CMA=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=256 + +CONFIG_XILINX_AXIDMA=y +CONFIG_XILINX_AXICDMA=y +CONFIG_XILINX_ZYNQMP_DMA=y +CONFIG_XILINX_DMA=y + +CONFIG_UIO=y +CONFIG_UIO_XILINX_APM=y +CONFIG_VIRTIO=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_SI570=y +CONFIG_COMMON_CLK_ZYNQMP=y +CONFIG_CLKSRC_OF=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y +CONFIG_OF_IOMMU=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_V3=y +# +CONFIG_REMOTEPROC=m +CONFIG_ZYNQMP_R5_REMOTEPROC=m + +CONFIG_STAGING=y +CONFIG_SOC_XILINX_ZYNQMP=y +CONFIG_ZYNQMP_PM_DOMAINS=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_ZYNQMP_PM_API=y +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y + +CONFIG_IIO=y +CONFIG_XILINX_AMS=y +CONFIG_XILINX_FCLK=y + +CONFIG_FPGA=y +CONFIG_FPGA_MGR_ZYNQMP_FPGA=y +CONFIG_NVMEM_ZYNQMP=y +CONFIG_FPGA_REGION=y +CONFIG_FPGA_BRIDGE=y + +CONFIG_RESET_CONTROLLER=y +CONFIG_ZYNQMP_RESET_CONTROLLER=y + +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y + + +CONFIG_FB=y +CONFIG_FB_XILINX=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_XILINX=y +CONFIG_VIDEO_XILINX_CFA=y +CONFIG_VIDEO_XILINX_CRESAMPLE=y +CONFIG_VIDEO_XILINX_HLS=y +CONFIG_VIDEO_XILINX_REMAPPER=y +CONFIG_VIDEO_XILINX_RGB2YUV=y +CONFIG_VIDEO_XILINX_SCALER=y +CONFIG_VIDEO_XILINX_SWITCH=y +CONFIG_VIDEO_XILINX_TPG=y +CONFIG_VIDEO_XILINX_VTC=y + +CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_XILINX=y +CONFIG_HDMI=y +CONFIG_XILINX_FRMBUF=y +CONFIG_XILINX_DPDMA=y +CONFIG_XILINX_DMA_ENGINES=y + +CONFIG_FW_LOADER=y + +CONFIG_TIGON3=m +CONFIG_E1000E=m diff --git a/bsp/xilinx-zynqmp/xilinx-zynqmp.scc b/bsp/xilinx-zynqmp/xilinx-zynqmp.scc new file mode 100644 index 0000000..81696c2 --- /dev/null +++ b/bsp/xilinx-zynqmp/xilinx-zynqmp.scc @@ -0,0 +1,7 @@ +include cfg/usb-mass-storage.scc +include cfg/fs/flash_fs.cfg +include features/hugetlb/hugetlb.scc +# enable the ability to run 32 bit apps +include arch/arm/32bit-compat.scc + +kconf hardware xilinx-zynqmp.cfg -- 2.7.4 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
