On 10/9/19 9:39 PM, Michal Simek wrote:
Hi,

On 09. 10. 19 4:38, quanyang.w...@windriver.com wrote:
From: Quanyang Wang <quanyang.w...@windriver.com>

Using new compatible value for funnel and replicator device nodes,
and use correct unit-address.

Signed-off-by: Quanyang Wang <quanyang.w...@windriver.com>
---
  arch/arm/boot/dts/zynq-7000.dtsi | 14 +++++++-------
  1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 5602f4f3ad1c..9b8f46d25d38 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -447,8 +447,8 @@
                        };
                };
- funnel@0,f8804000 {
-                       compatible = "arm,coresight-funnel", "arm,primecell";
+               funnel@f8804000 {
+                       compatible = "arm,coresight-static-funnel", 
"arm,primecell";
                        reg = <0xf8804000 0x1000>;
                        clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
                        clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
@@ -503,7 +503,7 @@
                };
replicator {
-                       compatible = "arm,coresight-replicator";
+                       compatible = "arm,coresight-static-replicator";
                        clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
                        clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
@@ -536,8 +536,8 @@
                        };
                };
- itm@0,f8805000 {
-                       compatible = "arm,coresight-etm3x", "arm,primecell";
+               /* ITM is not supported by kernel, only leave device node here 
*/
+               itm@f8805000 {
                        reg = <0xf8805000 0x1000>;
                        clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
                        clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
@@ -549,7 +549,7 @@
                        };
                };
- ptm@0,f889c000 {
+               ptm@f889c000 {
                        compatible = "arm,coresight-etm3x", "arm,primecell";
                        reg = <0xf889c000 0x1000>;
                        clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
@@ -562,7 +562,7 @@
                        };
                };
- ptm@0,f889d000 {
+               ptm@f889d000 {
                        compatible = "arm,coresight-etm3x", "arm,primecell";
                        reg = <0xf889d000 0x1000>;
                        clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;


I don't think this is enough. I have attached the patch against mainline
how I think it should look like.

Hi Michal,

Will ITM still use "arm,coresight-etm3x" as compatible property?

Thanks,

Quanyang


M

--
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to