Most of it is trivial but should help to understand the debugging output
better.
Signed-off-by: Stefan Schmidt <ste...@datenfreihafen.org>
---
drivers/ieee802154/cc2420.c | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/ieee802154/cc2420.c b/drivers/ieee802154/cc2420.c
index f8fab59..983800f 100644
--- a/drivers/ieee802154/cc2420.c
+++ b/drivers/ieee802154/cc2420.c
@@ -496,7 +496,7 @@ static void cc2420_sfd_irqwork(struct work_struct *work)
= container_of(work, struct cc2420_local, sfd_irqwork);
unsigned long flags;
- dev_dbg(&lp->spi->dev, "fifop interrupt received\n");
+ dev_dbg(&lp->spi->dev, "sfd interrupt received\n");
spin_lock_irqsave(&lp->lock, flags);
if (lp->is_tx) {
@@ -544,7 +544,7 @@ static int cc2420_hw_init(struct cc2420_local *lp)
udelay(1);
} while (!(status & CC2420_STATUS_XOSC16M_STABLE));
- dev_info(&lp->spi->dev, "oscillator succesfully brought up \n");
+ dev_info(&lp->spi->dev, "oscillator succesfully brought up\n");
return 0;
error_ret:
@@ -645,7 +645,7 @@ static int __devinit cc2420_probe(struct spi_device *spi)
goto err_free_gpio_vreg;
}
/* TODO: make it more readable */
- dev_info(&lp->spi->dev, "Found Chipon CC2420\n");
+ dev_info(&lp->spi->dev, "Found Chipcon CC2420\n");
dev_info(&lp->spi->dev, "Manufacturer ID:%x Version:%x Partnum:%x\n",
manidl & 0x0FFF, manidh >> 12, manidl >> 12);
@@ -662,7 +662,7 @@ static int __devinit cc2420_probe(struct spi_device *spi)
dev_name(&spi->dev),
lp);
if (ret) {
- dev_err(&spi->dev, "could not get fifop irq for some reason?
\n");
+ dev_err(&spi->dev, "could not get fifop irq?\n");
goto err_free_fifop_irq;
}
@@ -672,12 +672,13 @@ static int __devinit cc2420_probe(struct spi_device *spi)
dev_name(&spi->dev),
lp);
if (ret) {
- dev_err(&spi->dev, "could not get sfd irq for some reason? \n");
+ dev_err(&spi->dev, "could not get sfd irq?\n");
goto err_free_sfd_irq;
}
- dev_dbg(&lp->spi->dev, "Close addr decode\n");
- cc2420_write_16_bit_reg_partial(lp, CC2420_MDMCTRL0, 0, 1 <<
CC2420_MDMCTRL0_ADRDECODE);
+ dev_dbg(&lp->spi->dev, "Disable hardware address decoding\n");
+ cc2420_write_16_bit_reg_partial(lp, CC2420_MDMCTRL0,
+ 0, 1 << CC2420_MDMCTRL0_ADRDECODE);
dev_info(&lp->spi->dev, "Set fifo threshold to 127\n");
cc2420_write_16_bit_reg_partial(lp, CC2420_IOCFG0, 127,
CC2420_FIFOP_THR_MASK);
ret = cc2420_register(lp);
--
1.7.1
------------------------------------------------------------------------------
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
