Great, thank you very much. This was really helpful to me. I'll just start with the firmware on it.
On Mar 24, 2011, at 10:22 AM, Mariano Alvira <m...@devl.org> wrote: > On Thu, Mar 24, 2011 at 10:14:27AM -0400, George Nychis wrote: >> Thanks a bunch for the response! >> >> I am looking in to the Econotag now. The firmware option at purchase >> does not matter, does it? It looks like I can get it with the >> linux802154-serialdev firmware. Is this easily flashable over the USB >> interface? > > Yes, it's easy to flash/erase over the USB interface: > > http://mc1322x.devl.org/bbmc.html > > http://mc1322x.devl.org/libmc1322x.html > > The pre-burned serial firmware option is just an easy way for people > to get started working at the serial command level without having to > setup the econotag dev. etc... (e.g. people who want to use kismet to > sniff 802.15.4 can just buy the econotag with the firmware burned and > set a config option in kismet) > > -Mar. ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Linux-zigbee-devel mailing list Linux-zigbee-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
