Hello, I'm glad to announce the first release of SimpleRPL, a Linux-based implementation of the Routing Protocol for Low-Power and Lossy Networks (RPL). This protocol has been developed at the IETF as an attempt to define a routing protocol suitable for lossy and low bandwidth link-layer (such as IEEE 802.15.4). It operates on top of IPv6 using ICMPv6 messages. You can learn more about it in RFC 6550.
This implementation is a fully functional (and hopefully fully compliant) implementation of the standard. I tested it on both wired and wireless links and it ran just fine, although you might want to adjust some constant value (as I picked the default values from the RFC and did not performed any fine tuning to it). I could not test simpleRPL against the Contiki' implementation of RPL (due to the current 6LoWPAN interrop issues between Linux and Contiki). The GitHub project page provide more information concerning the limitations and various design choices. Once I'm confident it runs correctly (through your feedback), I'll announce it to a wider audience. The implementation is currently hosted on GitHub: https://github.com/tcheneau/simpleRPL Thanks in advance for all your feedback. Regards, Tony ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Linux-zigbee-devel mailing list Linux-zigbee-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
