�a �a a l'air ok

ppp0 Lien encap:Protocole Point-�-Point inet adr:80.9.62.125 P-t-P:193.251.96.29 Masque:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:3 RX bytes:64 (64.0 b) TX bytes:97 (97.0 b)


�a par contre pas vraiment
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
193.251.96.29 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

la route par d�faut passe par ton interface eth0 et pas par ppp0

=>
route del -net 0.0.0.0 gw 192.168.1.1
route add default ppp0

tips:En final, tu devrais obtenir quelque chose comme ici(au milieu de la page)
http://www.tldp.org/HOWTO/PPP-HOWTO/manual.html

Xavier




_______________________________________________________
Linux Mailing List - http://www.unixtech.be
Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux
Archives: http://www.mail-archive.com/[email protected]
IRC: efnet.unixtech.be:6667 - #unixtech

Répondre à