Greetings, Yep, that's a standard PLCC in a socket. Just as a quick tip, they are often quite tight. I like to extract and replace 4-5 times with power off on a new board just to 'break it in' so things go easy when hot swapping later.
One further caution, in spite of being keyed, it is fairly easy to insert the chip backwards. Be sure to check it visually. If the chip heats up (it will if backwards), pull power quickly. G'day, sjames On Thu, 28 Nov 2002, Nathanael Noblet wrote: > > On Thursday, November 28, 2002, at 05:59 PM, steven james wrote: > > > Greetings, > > > > If the flash is in a socket, no problem. Believe it or not, the PLCC > > flash > > chips can be hot swapped (power ON). So, the best approach is to use a > > spare chip for LinuxBIOS, and keep the original as a rescue chip. > > Well I'd like to know if this is a socket. It doesn't seem like it to > me... but I imagine with the right tool I would be removable. I have > taken a picture with a web camera. It is a bad picture but I think it > is clear enough that someone familiar with BIOS's would recognize it. > So if you would be so kind as to check that would be great. the address > is http://www.gnat.ca/photos/SBC.jpg . Let me know if it looks like a > removable and I'll start getting the code up and ready to try. Just as > a little description, the square piece in the middle is the AWARD PNP > chip and directly below it is the DiscOnChip 2000. > > > -- -------------------------steven james, director of research, linux labs ... ........ ..... .... 230 peachtree st nw ste 701 the original linux labs atlanta.ga.us 30303 -since 1995 http://www.linuxlabs.com office 404.577.7747 fax 404.577.7743 ----------------------------------------------------------------------- _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
