"Brian G. Rhodes" <[EMAIL PROTECTED]> writes: > The reason I was not getting interrupts on devices in the pci slot on the > EPIA is because they were not set to be bus masters, so they would never > generate interrupts. A quick write to the command register fixed the > problem. Command register is being set to 0x02. It should be set to > 0x06. a 6 to 4.
Actually this is an interesting symptom. Being a Bus Master means you can initiate transactions on the PCI bus i.e. DMA. There is no requirement that I know of that the bus master bit applies to IRQ's. Those are out of band signals. Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
