On 13 Jun 2003, Eric W. Biederman wrote: > "Brian G. Rhodes" <[EMAIL PROTECTED]> writes: > > > The reason I was not getting interrupts on devices in the pci slot on the > > EPIA is because they were not set to be bus masters, so they would never > > generate interrupts. A quick write to the command register fixed the > > problem. Command register is being set to 0x02. It should be set to > > 0x06. a 6 to 4. > > Actually this is an interesting symptom. Being a Bus Master means you > can initiate transactions on the PCI bus i.e. DMA. There is no requirement > that I know of that the bus master bit applies to IRQ's. Those are out > of band signals.
Seems like a hardware bug to me. ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
