Hello Lu, Is there anything in CVS yet for K8 CPU support? I didn't see anything a week or so ago. The AMD folks say it's there and "production level".
? Thanks. Alan Mimms, Senior Architect F5 Networks, Inc. Spokane Development Center Liberty Lake, Washington v: 509-343-3524 f: 509-343-3501 -----Original Message----- From: YhLu [mailto:[EMAIL PROTECTED] Sent: Monday, September 29, 2003 10:06 AM To: ron minnich Cc: Stefan Reinauer; Eric W. Biederman; [EMAIL PROTECTED] Subject: Re: config tool + tree enumeration Ron, In s2880, If I don't change the 0 to 1. I will get two copy of bus1 devices in the Linux. In S2885, it is OK, if I don't change it. In Arima, You still can not see bus1 device now? Regards Yinghai Lu -----邮件原件----- 发件人: ron minnich [mailto:[EMAIL PROTECTED] 发送时间: 2003年9月29日 10:00 收件人: YhLu 抄送: Stefan Reinauer; Eric W. Biederman; [EMAIL PROTECTED] 主题: Re: config tool + tree enumeration On Mon, 29 Sep 2003, YhLu wrote: > Stefan, > > >It's bus 1, that LinuxBIOS and OpenBIOS > >find really well, only Linux refuses to see it. > > Do you update the irq_table.c's interrupt router bus no. from to "0" to "1"? that's not the problem. The problem is that linux does not see bus 1 at all. ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
