There is an X86-64 option in Etherboot config, did you enable it? Regards
YH. -----邮件原件----- 发件人: Stefan Reinauer [mailto:[EMAIL PROTECTED] 发送时间: 2003年10月6日 7:38 收件人: [EMAIL PROTECTED] 主题: Re: K8 MTRR reboot on Solo * Stefan Reinauer <[EMAIL PROTECTED]> [031006 14:13]: the card is connected with a cross cable to a HDAMA.. etherboot 5.3.1: > [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE > Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) > Link is up at 1000 Mbps, full duplex. TX RX flow control > Searching for server (DHCP)... > ..UDP checksum error > .UDP checksum error > .UDP checksum error > ..Me: 192.168.0.20, Server: 192.168.0.23 > Loading 192.168.0.23:legacybios ... > <takes forever> etherboot 5.3.2: Etherboot 5.3.2 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE] Relocating _text from: [000264d0,00058500) to [0fecdfd0,0ff00000) .ÿProbing pci nic...or (Q)uit? [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) Link is up at 1000 Mbps, full duplex. TX RX flow control Searching for server (DHCP)... ..transmit timed out tg3_stop_block timed out, ofs=00003c00 enable_bit=00000002 .<abort> etherboot 5.2.2 seems to be the same as 5.2.0 Best regards, Stefan Reinauer -- Architecture Team SuSE Linux AG _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
