Greetings, Is the cross cable fully wired for Gig ether? I've seen a lot of cables where only 2 pairs are crossed and the rest wired direct, and I've seen Gig ether NICs get terribly confused by that.
G'day, sjames On Mon, 6 Oct 2003, Stefan Reinauer wrote: > * Stefan Reinauer <[EMAIL PROTECTED]> [031006 14:13]: > > the card is connected with a cross cable to a HDAMA.. > > etherboot 5.3.1: > > > [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE > > Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) > > Link is up at 1000 Mbps, full duplex. TX RX flow control > > Searching for server (DHCP)... > > ..UDP checksum error > > .UDP checksum error > > .UDP checksum error > > ..Me: 192.168.0.20, Server: 192.168.0.23 > > Loading 192.168.0.23:legacybios ... > > <takes forever> > > etherboot 5.3.2: > Etherboot 5.3.2 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE] > Relocating _text from: [000264d0,00058500) to [0fecdfd0,0ff00000) > .�Probing pci nic...or (Q)uit? > [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE > Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) > Link is up at 1000 Mbps, full duplex. TX RX flow control > Searching for server (DHCP)... > ..transmit timed out > tg3_stop_block timed out, ofs=00003c00 enable_bit=00000002 > .<abort> > > etherboot 5.2.2 seems to be the same as 5.2.0 > > > > Best regards, > Stefan Reinauer > > -- -------------------------steven james, director of research, linux labs ... ........ ..... .... 230 peachtree st nw ste 2701 the original linux labs atlanta.ga.us 30303 -since 1995 http://www.linuxlabs.com office 404.577.7747 fax 404.577.7743 ----------------------------------------------------------------------- _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
