def sure 57600 is (currently) the max on /dev/ttyS0. (but my setup is 115200). i dont care much, but of course it should be fixed.
/dev/ttyS0 was at 115200 when i changed from the regular bios to linuxbios. a soft reset was ok -- still 115200. but after pressing the power switch the port was at 57600 max. i have to check ttyS1... (i am working with devfs so i might refer to tts/1 in furure...) niki On 18-Nov-2003 Dave Ashley wrote: >>perfect!!! > > Can you verify something: On my epia-m ttyS0 is 1/2 the baud rate it should > be, so I can't get 115,200 baud, only 57,600. Can you verify if you can > get 115,200 on both serial ports? > > -Dave > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios -- niki w. waibel - system administrator @ newlogic technologies ag _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
