Li-Ta Lo <[EMAIL PROTECTED]> writes: > > You might need to specify the bridges/busses in Config.lb. > > I know the current code works and can handle this. > > > > > Does anyone can help on this ? > > > > Without something like a serial console trace so that the details > > of what are going on are clear I don't know. > > > > Please see that attached log. As you ca see the HyperTransport scan > is not actually done in northbridge.c:amdk8_scan_chain(). It only > prints the message before and after the for loop but skip the loop.
Please reread my hunch below. It looks like I nailed it on the head. The fact that the first pci_scan_bus shows devices below 0x18 is confirmation of this. mainboard_operations needs to specify amdk8_scan_root_bus. > > I have a hunch. The default code for setting things up is > > for pci devices. In the opteron mainboard files we need to specify > > non-default operations so we do the hypertransport scan. One > > of the things that does is to put everything back at devfn 0 > > if they have changed from someplace else. > > > > amdk8_scan_root_bus very deliberately avoids all of the other > > functions that are not cpus so if you are using it I don't see > > how you would run into the problem you have described. > > Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
