On Mon, 2004-04-26 at 11:58, Eric W. Biederman wrote:
> Li-Ta Lo <[EMAIL PROTECTED]> writes:
>
> > > You might need to specify the bridges/busses in Config.lb.
> > > I know the current code works and can handle this.
> > >
> > > > Does anyone can help on this ?
> > >
> > > Without something like a serial console trace so that the details
> > > of what are going on are clear I don't know.
> > >
> >
> > Please see that attached log. As you ca see the HyperTransport scan
> > is not actually done in northbridge.c:amdk8_scan_chain(). It only
> > prints the message before and after the for loop but skip the loop.
>
> Please reread my hunch below. It looks like I nailed it on the head.
> The fact that the first pci_scan_bus shows devices below 0x18 is
> confirmation of this.
>
> mainboard_operations needs to specify amdk8_scan_root_bus.
>
What exactly are you talking about ? It is amdk8_scan_root_bus
in ibm/e325/mainboard.c.
static struct device_operations mainboard_operations = {
.read_resources = root_dev_read_resources,
.set_resources = root_dev_set_resources,
.enable_resources = enable_childrens_resources,
.init = mainboard_init,
.scan_bus = amdk8_scan_root_bus,
.enable = 0,
};
Ollie
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
