On Thu, 2005-03-10 at 08:37, Ronald G. Minnich wrote: > On Thu, 10 Mar 2005 [EMAIL PROTECTED] wrote: > > > 1st, what settings do you have in the Config.lb for enabling the IDE > > controllers > > - they should be in compatibility mode (I think). > > yes, and they are not. I did notice that.
As Ron said, there are no such settings. How do I set them in compatibility mode? > > 2nd, I'm curious to know how stable your raminit appears to be, I've > > been having problems with it hanging reading the spd eprom on the > > dimm's. > > yes, overall the southbridge seems to be significantly less reliable than > it used to be. We have seen the same hang. > > The code is much better, we just have to shake it out a little. That problem has reared up a few times. Quite odd how intermittent it is - seems to just start happenning on some builds and rarely thereafter gets past initialization, then on another build (with no different settings), it works fine indefinately. > > 3rd, I have a cleaned up version of the southbridge/via/vt8231/vt8231.c > > ready to commit after Ron checks it over, if you'd like to test it, I > > can email you the diff (plus a few changes to the Options.lb and > > Config.lb) > > I think we're interested in that! > > ron I certainly am - sent it our way and I'll try it out on a couple boards. _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
