> Well - it was the one available for the mini-itx-case as low profile one, no > doubt the manufacturers know why they do not use bridges...
Ah I'm probably talking about a different device. The riser PCI cards I'm thinking of will generally add too much extra capacitance to the bus. The clock spec is only expects one connector between the devices. However, if you don't have a full bus then you can get by. The PCI spec is tight but you can push it pretty far out of spec. > No, no! > > The conflicting devices are indeed on the same bus "1", theoretically it would > look like this: > 01:07.0 Network controller: Intel ... > 01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Sorry I was confusing your VGA devices with your BT framegrabber. > I guessed it must be a problem with interrupt or DMA not working or the card > not being correctly initialised (PCI-memory ranges), just wild guesses. Sounds like you will have to work with the driver writer(s). -- Richard A. Smith _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
