Sorry. Forgot to attach.
Allright, here is the more verbose output.
It seems that 12.4 is assign as first pci vga Device anymore.
Tomorrow I will try to set
if 1 to if 0 in device.c
I hope than is taken the right one.
What about the rom_adress
stefan means 0xfffc0000
ron means 0xffffc000
:D
what should I try?
The vga segment is located first in the image.
chris
Richard A. Smith
LinuxBIOS-1.1.8.0Fallback Sun Apr 23 23:42:37 CEST 2006 starting...
Setting up default parameters for memory
Sizing memory
Probing for DIMM0
Found DIMM0
Page Size: 00001000
Component Banks: 4
Module Banks: 1
DIMM size: 04000000
Probing for DIMM1
MC_BANK_CFG = 00701420
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Sun Apr 23 23:42:37 CEST 2006 booting...
end 52c244a5, start 0
32-bit delta 360
calibrate_tsc 32-bit result is 360
clocks_per_usec: 360
Enumerating buses...
scan_static_bus for Root Device
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1078/0001] ops
PCI: 00:00.0 [1078/0001] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: 00:09.0 [10ea/5000] enabled
PCI: devfn 0x49, bad id 0xffffffff
PCI: devfn 0x4a, bad id 0xffffffff
PCI: devfn 0x4b, bad id 0xffffffff
PCI: devfn 0x4c, bad id 0xffffffff
PCI: devfn 0x4d, bad id 0xffffffff
PCI: devfn 0x4e, bad id 0xffffffff
PCI: devfn 0x4f, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: 00:12.0 [1078/0100] bus ops
southbridge_enable: dev is 00018b40
PCI: 00:12.0 [1078/0100] enabled
malloc Enter, size 668, free_mem_ptr 00022000
malloc 0x00022000
PCI: 00:12.1 [1078/0101] enabled
malloc Enter, size 668, free_mem_ptr 0002229c
malloc 0x0002229c
PCI: 00:12.2 [1078/0102] ops
cs5530_ide: ide_enable
PCI: 00:12.2 [1078/0102] enabled
malloc Enter, size 668, free_mem_ptr 00022538
malloc 0x00022538
PCI: 00:12.3 [1078/0103] enabled
malloc Enter, size 668, free_mem_ptr 000227d4
malloc 0x000227d4
PCI: 00:12.4 [1078/0104] enabled
PCI: devfn 0x95, bad id 0xffffffff
PCI: devfn 0x96, bad id 0xffffffff
PCI: devfn 0x97, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 00022a70
malloc 0x00022a70
PCI: 00:13.0 [0e11/a0f8] enabled
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:12.0
PNP: 002e.0 enabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
PCI: 00:12.1 disabled
PCI: 00:12.2 enabled
PCI: 00:12.3 disabled
PCI: 00:12.4 disabled
scan_static_bus for PCI: 00:12.0 done
PCI: pci_scan_bus returning with max=00
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io
Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem
PCI: 00:12.4 10 * [0x01000000 - 0x01000fff] mem
PCI: 00:13.0 10 * [0x01001000 - 0x01001fff] mem
PCI: 00:12.1 10 * [0x01002000 - 0x010020ff] mem
PCI: 00:12.3 10 * [0x01003000 - 0x0100307f] mem
Root Device compute_allocate_mem: base: 01003080 size: 01003080 align: 24 gran:
0 done
Done reading resources.
first onboard = PCI: 00:09.0
Skipping disabled device PNP: 002e.3
Skipping disabled device PCI: 00:12.1
Skipping disabled device PCI: 00:12.3
Skipping disabled device PCI: 00:12.4
vga_first = PCI: 00:12.4
vga = PCI: 00:12.4
Looking at vga_onboard
Reassigning vga to PCI: 00:12.4
Allocating VGA resource PCI: 00:09.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io
Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: fd000000 size: 01003080 align: 24 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem
PCI: 00:12.4 10 * [0xfe000000 - 0xfe000fff] mem
PCI: 00:13.0 10 * [0xfe001000 - 0xfe001fff] mem
PCI: 00:12.1 10 * [0xfe002000 - 0xfe0020ff] mem
PCI: 00:12.3 10 * [0xfe003000 - 0xfe00307f] mem
Root Device compute_allocate_mem: base: fe003080 size: 01003080 align: 24 gran:
0 done
Root Device assign_resources, bus 0 link: 0
BC_DRAM_TOP = 0x03bfffff
MC_GBASE_ADD = 0x00000078
I would set ram size to 60 Mbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:12.1 10 <- [0x00fe002000 - 0x00fe0020ff] mem
PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io
PCI: 00:12.3 10 <- [0x00fe003000 - 0x00fe00307f] mem
PCI: 00:12.4 10 <- [0x00fe000000 - 0x00fe000fff] mem
PCI: 00:13.0 10 <- [0x00fe001000 - 0x00fe001fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:09.0 subsystem <- 00/00
PCI: 00:09.0 cmd <- 143
cs5530.c: cs5530_pci_dev_enable_resources()
PCI: 00:12.0 cmd <- 14f
PCI: 00:12.2 missing enable_resources
PCI: 00:12.1 cmd <- 142
PCI: 00:12.2 cmd <- 141
PCI: 00:12.3 cmd <- 142
PCI: 00:12.4 cmd <- 142
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
PCI: 00:09.0 init
PCI: 00:12.0 init
cs5530: southbridge_init
PNP: 002e.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.4 init
PNP: 002e.5 init
PNP: 002e.6 init
PNP: 002e.7 init
PNP: 002e.8 init
PCI: 00:12.1 init
PCI: 00:12.2 init
cs5530_ide: ide_init
PCI: 00:12.3 init
PCI: 00:12.4 init
PCI: 00:13.0 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...failed
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 000006c4 checksum 3168
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
