Here is the output with changed patch. vendor/device ID to cyberpro.
LinuxBIOS-1.1.8.0Fallback Mon Apr 24 16:30:34 CEST 2006 starting...
Setting up default parameters for memory
Sizing memory
Probing for DIMM0
Found DIMM0
Page Size: 00001000
Component Banks: 4
Module Banks: 1
DIMM size: 04000000
Probing for DIMM1
MC_BANK_CFG = 00701420
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Mon Apr 24 16:30:34 CEST 2006 booting...
end 530054e5, start 0
32-bit delta 346
calibrate_tsc 32-bit result is 346
clocks_per_usec: 346
Enumerating buses...
scan_static_bus for Root Device
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1078/0001] ops
PCI: 00:00.0 [1078/0001] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: 00:09.0 [10ea/5000] ops
PCI: 00:09.0 [10ea/5000] enabled
PCI: devfn 0x49, bad id 0xffffffff
PCI: devfn 0x4a, bad id 0xffffffff
PCI: devfn 0x4b, bad id 0xffffffff
PCI: devfn 0x4c, bad id 0xffffffff
PCI: devfn 0x4d, bad id 0xffffffff
PCI: devfn 0x4e, bad id 0xffffffff
PCI: devfn 0x4f, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: 00:12.0 [1078/0100] bus ops
southbridge_enable: dev is 00018900
PCI: 00:12.0 [1078/0100] enabled
malloc Enter, size 668, free_mem_ptr 00022000
malloc 0x00022000
PCI: 00:12.1 [1078/0101] enabled
malloc Enter, size 668, free_mem_ptr 0002229c
malloc 0x0002229c
PCI: 00:12.2 [1078/0102] ops
cs5530_ide: ide_enable
PCI: 00:12.2 [1078/0102] enabled
malloc Enter, size 668, free_mem_ptr 00022538
malloc 0x00022538
PCI: 00:12.3 [1078/0103] enabled
malloc Enter, size 668, free_mem_ptr 000227d4
malloc 0x000227d4
PCI: 00:12.4 [1078/0104] enabled
PCI: devfn 0x95, bad id 0xffffffff
PCI: devfn 0x96, bad id 0xffffffff
PCI: devfn 0x97, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 00022a70
malloc 0x00022a70
PCI: 00:13.0 [0e11/a0f8] enabled
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:12.0
PNP: 002e.0 enabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
PCI: 00:12.1 disabled
PCI: 00:12.2 enabled
PCI: 00:12.3 disabled
PCI: 00:12.4 disabled
scan_static_bus for PCI: 00:12.0 done
PCI: pci_scan_bus returning with max=00
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io
Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem
PCI: 00:12.4 10 * [0x01000000 - 0x01000fff] mem
PCI: 00:13.0 10 * [0x01001000 - 0x01001fff] mem
PCI: 00:12.1 10 * [0x01002000 - 0x010020ff] mem
PCI: 00:12.3 10 * [0x01003000 - 0x0100307f] mem
Root Device compute_allocate_mem: base: 01003080 size: 01003080 align: 24 gran:
0 done
Done reading resources.
Looking at device Root Device
Looking at device PCI_DOMAIN: 0000
Looking at device PCI: 00:00.0
Looking at device PCI: 00:09.0
first onboard = PCI: 00:09.0
Looking at device PCI: 00:09.0
Looking at device PCI: 00:12.0
Looking at device PNP: 002e.0
Looking at device PNP: 002e.1
Looking at device PNP: 002e.2
Looking at device PNP: 002e.3
Skipping disabled device PNP: 002e.3
Looking at device PNP: 002e.4
Looking at device PNP: 002e.5
Looking at device PNP: 002e.6
Looking at device PNP: 002e.7
Looking at device PNP: 002e.8
Looking at device PCI: 00:12.1
Skipping disabled device PCI: 00:12.1
Looking at device PCI: 00:12.2
Looking at device PCI: 00:12.3
Skipping disabled device PCI: 00:12.3
Looking at device PCI: 00:12.4
Skipping disabled device PCI: 00:12.4
Looking at device PCI: 00:12.1
Looking at device PCI: 00:12.2
Looking at device PCI: 00:12.3
Looking at device PCI: 00:12.4
vga_first = PCI: 00:12.4
Looking at device PCI: 00:13.0
vga = PCI: 00:12.4
Looking at vga_onboard
Yes: PCI: 00:09.0
Reassigning vga to PCI: 00:09.0
Allocating VGA resource PCI: 00:09.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io
Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: fd000000 size: 01003080 align: 24 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem
PCI: 00:12.4 10 * [0xfe000000 - 0xfe000fff] mem
PCI: 00:13.0 10 * [0xfe001000 - 0xfe001fff] mem
PCI: 00:12.1 10 * [0xfe002000 - 0xfe0020ff] mem
PCI: 00:12.3 10 * [0xfe003000 - 0xfe00307f] mem
Root Device compute_allocate_mem: base: fe003080 size: 01003080 align: 24 gran:
0 done
Root Device assign_resources, bus 0 link: 0
BC_DRAM_TOP = 0x03bfffff
MC_GBASE_ADD = 0x00000078
I would set ram size to 60 Mbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:12.1 10 <- [0x00fe002000 - 0x00fe0020ff] mem
PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io
PCI: 00:12.3 10 <- [0x00fe003000 - 0x00fe00307f] mem
PCI: 00:12.4 10 <- [0x00fe000000 - 0x00fe000fff] mem
PCI: 00:13.0 10 <- [0x00fe001000 - 0x00fe001fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:09.0 cmd <- 143
cs5530.c: cs5530_pci_dev_enable_resources()
PCI: 00:12.0 cmd <- 14f
PCI: 00:12.2 missing enable_resources
PCI: 00:12.1 cmd <- 142
PCI: 00:12.2 cmd <- 141
PCI: 00:12.3 cmd <- 142
PCI: 00:12.4 cmd <- 142
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
PCI: 00:09.0 init
PCI: 00:12.0 init
cs5530: southbridge_init
PNP: 002e.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.4 init
PNP: 002e.5 init
PNP: 002e.6 init
PNP: 002e.7 init
PNP: 002e.8 init
PCI: 00:12.1 init
PCI: 00:12.2 init
cs5530_ide: ide_init
PCI: 00:12.3 init
PCI: 00:12.4 init
PCI: 00:13.0 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...failed
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 000006c4 checksum 7fea
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
33:stream_init() - rom_stream: 0xfffe0000 - 0xffff2fff
Found ELF candiate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 00022d0c
malloc 0x00022d0c
New segment addr 0x100000 size 0x23ea0 offset 0xa0 filesize 0x9e08
(cleaned up) New segment addr 0x100000 size 0x23ea0 offset 0xa0 filesize 0x9e08
lb: [0x0000000000004000, 0x0000000000026000)
malloc Enter, size 32, free_mem_ptr 00022d2c
malloc 0x00022d2c
New segment addr 0x123ea0 size 0x48 offset 0x9ec0 filesize 0x48
(cleaned up) New segment addr 0x123ea0 size 0x48 offset 0x9ec0 filesize 0x48
lb: [0x0000000000004000, 0x0000000000026000)
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000023ea0 filesz:
0x0000000000009e08
[ 0x0000000000100000, 0000000000109e08, 0x0000000000123ea0) <- 00000000000000a0
Clearing Segment: addr: 0x0000000000109e08 memsz: 0x000000000001a098
Loading Segment: addr: 0x0000000000123ea0 memsz: 0x0000000000000048 filesz:
0x0000000000000048
[ 0x0000000000123ea0, 0000000000123ee8, 0x0000000000123ee8) <- 0000000000009ec0
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x107a20
entry = 0x00107a20
lb_start = 0x00004000
lb_size = 0x00022000
adjust = 0x03bda000
buffer = 0x03bbc000
elf_boot_notes = 0x0001b0a0
adjusted_boot_notes = 0x03bf50a0
FILO version 0.4.2 ([EMAIL PROTECTED]) Fri Apr 21 16:37:59 CEST 2006
Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 timed out
boot: hdc1:/vmlinuz initrd=hdc1:/initrd.gz ramdisk_size=13000 root=/dev/ram0
max_loop=16 console=tty0 console=ttyS0,115200 LABEL=FB video=vesa:ywrap,mtrr
vga=0x317 splash=silent MEDIA=hd CONFIG=False
hdc: LBA 128MB: TRANSCEND
Mounted fat
Found Linux version 2.4.22 ([EMAIL PROTECTED]) #11 Sat Apr 22 18:51:23 CEST
2006 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
Linux version 2.4.22 ([EMAIL PROTECTED]) (gcc version 3.3 20030226 (prerelease)
(SuSE Linux)) #11 Sat Apr 22 18:51:23 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000738 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 0000000003c00000 (usable)
60MB LOWMEM available.
hm, page 00000000 reserved twice.
On node 0 totalpages: 15360
zone(0): 4096 pages.
zone(1): 11264 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: ramdisk_size=13000 root=/dev/ram0 max_loop=16 console=tty0
console=ttyS0,115200 LABEL=FB video=vesa:ywrap,mtrr vga=0x317 splash=silent
MEDIA=hd CONFIG=False
Initializing CPU#0
Working around Cyrix MediaGX virtual DMA bugs.
Detected 233.867 MHz processor.
Calibrating delay loop... 466.94 BogoMIPS
Memory: 54920k/61440k available (919k kernel code, 6132k reserved, 258k data,
248k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Working around Cyrix MediaGX virtual DMA bugs.
CPU: NSC Geode(TM) Integrated Processor by National Semi stepping 01
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: none
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x10)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 13000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5530: IDE controller at PCI slot 00:12.2
CS5530: chipset revision 0
CS5530: not 100% native mode: will probe irqs later
PCI: 00:12.0 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:12.0 PCI cache line size corrected to 16.
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=0/0/0 from BIOS ignored
hda: TRANSCEND DOM128M, ATA DISK drive
hdc: TRANSCEND, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0)
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 250368 sectors (128 MB) w/2KiB Cache, CHS=978/8/32
hdc: attached ide-disk driver.
hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdc: task_no_data_intr: error=0x04 { DriveStatusError }
hdc: 250880 sectors (128 MB) w/2KiB Cache, CHS=980/8/32
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
/dev/ide/host0/bus1/target0/lun0: p1 p2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3791k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 248k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
init started: BusyBox v0.60.5 (2005.09.18-12:18+0000) multi-call binary
rm: unable to remove `/etc/mtab': Read-only file system
Jan 2 16:34:04 (none) syslog.info syslogd started: BusyBox v0.60.5
(2005.09.18-12:18+0000)
/sbin/klogd: invalid option -- c
BusyBox v0.60.5 (2005.09.18-12:18+0000) multi-call binary
Usage: klogd -n
Kernel logger.
Options:
-n Run as a foreground process.
/dev/shm on /tmp type tmpfs (rw)
none on /proc type proc (rw)
depmod: Can't open /lib/modules/2.4.22/modules.dep for writing
Starting devfs daemon: /sbin/devfsd /dev
Started device management daemon v1.3.25 for /dev
/dev/ide/host0/bus1/target0/lun0: p1 p2
open /dev/fb0: No such file or directory
Attempting to find MoviX on /dev/discs/disc0/part1
/dev/ide/host0/bus1/target0/lun0: p1 p2
Attempting to find MoviX on /dev/discs/disc1/part1
/dev/ide/host0/bus1/target0/lun0: p1 p2
/dev/ide/host0/bus1/target0/lun0: p1 p2
Found MoviX folder in /dev/discs/disc1/part1!
ln: /cdrom/credits.txt: Read-only file system
ln: /cdrom/doctools: Read-only file system
ln: /cdrom/flashrom: Read-only file system
ln: /cdrom/initrd.gz: Read-only file system
ln: /cdrom/ldlinux.sys: Read-only file system
ln: /cdrom/movix: Read-only file system
ln: /cdrom/mphelp.txt: Read-only file system
ln: /cdrom/mx2help.txt: Read-only file system
ln: /cdrom/qlcboot.lss: Read-only file system
ln: /cdrom/qlcboot.msg: Read-only file system
ln: /cdrom/syslinux.cfg: Read-only file system
ln: /cdrom/trblst.txt: Read-only file system
ln: /cdrom/trblst2.txt: Read-only file system
ln: /cdrom/trblst3.txt: Read-only file system
ln: /cdrom/uniflash: Read-only file system
ln: /cdrom/version.txt: Read-only file system
ln: /c
BusyBox v0.60.5 (2005.09.18-12:18+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
id: unknown user name: 0
id: unknown user name: 0
# lspci -vv
00:00.0 0600: 1078:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:09.0 0300: 10ea:5000 (rev 02)
Subsystem: 0202:0202
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 08000000 [disabled] [size=64K]
00:12.0 0601: 1078:0100
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 04
00:12.1 0680: 1078:0101
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe002000 (32-bit, non-prefetchable) [size=256]
00:12.2 0101: 1078:0102 (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at 1000 [size=128]
00:12.3 0401: 1078:0103
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe003000 (32-bit, non-prefetchable) [size=128]
00:12.4 0300: 1078:0104
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
00:13.0 0c03: 0e11:a0f8 (rev 06) (prog-if 10)
Subsystem: 0e11:a0f8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fe001000 (32-bit, non-prefetchable) [size=4K]
# --
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
