Can you apply the attached patch and try again?
Stefan
Well, here is the debug.
Now, the Kalhua is detect as onboard vga and assigned.
( That is not what I want :) )
lspci output is a little bit different.
Both vga devices have no enabled IO Range.
chris
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1078/0001] ops
PCI: 00:00.0 [1078/0001] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: 00:09.0 [10ea/5000] enabled
PCI: devfn 0x49, bad id 0xffffffff
PCI: devfn 0x4a, bad id 0xffffffff
PCI: devfn 0x4b, bad id 0xffffffff
PCI: devfn 0x4c, bad id 0xffffffff
PCI: devfn 0x4d, bad id 0xffffffff
PCI: devfn 0x4e, bad id 0xffffffff
PCI: devfn 0x4f, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: 00:12.0 [1078/0100] bus ops
southbridge_enable: dev is 00018900
PCI: 00:12.0 [1078/0100] enabled
malloc Enter, size 668, free_mem_ptr 00022000
malloc 0x00022000
PCI: 00:12.1 [1078/0101] enabled
malloc Enter, size 668, free_mem_ptr 0002229c
malloc 0x0002229c
PCI: 00:12.2 [1078/0102] ops
cs5530_ide: ide_enable
PCI: 00:12.2 [1078/0102] enabled
malloc Enter, size 668, free_mem_ptr 00022538
malloc 0x00022538
PCI: 00:12.3 [1078/0103] enabled
malloc Enter, size 668, free_mem_ptr 000227d4
malloc 0x000227d4
PCI: 00:12.4 [1078/0104] ops
PCI: 00:12.4 [1078/0104] enabled
PCI: devfn 0x95, bad id 0xffffffff
PCI: devfn 0x96, bad id 0xffffffff
PCI: devfn 0x97, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 00022a70
malloc 0x00022a70
PCI: 00:13.0 [0e11/a0f8] enabled
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:12.0
PNP: 002e.0 enabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
PCI: 00:12.1 disabled
PCI: 00:12.2 enabled
PCI: 00:12.3 disabled
PCI: 00:12.4 disabled
scan_static_bus for PCI: 00:12.0 done
PCI: pci_scan_bus returning with max=00
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io
Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem
PCI: 00:12.4 10 * [0x01000000 - 0x01000fff] mem
PCI: 00:13.0 10 * [0x01001000 - 0x01001fff] mem
PCI: 00:12.1 10 * [0x01002000 - 0x010020ff] mem
PCI: 00:12.3 10 * [0x01003000 - 0x0100307f] mem
Root Device compute_allocate_mem: base: 01003080 size: 01003080 align: 24 gran:
0 done
Done reading resources.
Looking at device Root Device
Looking at device PCI_DOMAIN: 0000
Looking at device PCI: 00:00.0
Looking at device PCI: 00:09.0
first onboard = PCI: 00:09.0
Looking at device PCI: 00:09.0
Looking at device PCI: 00:12.0
Looking at device PNP: 002e.0
Looking at device PNP: 002e.1
Looking at device PNP: 002e.2
Looking at device PNP: 002e.3
Skipping disabled device PNP: 002e.3
Looking at device PNP: 002e.4
Looking at device PNP: 002e.5
Looking at device PNP: 002e.6
Looking at device PNP: 002e.7
Looking at device PNP: 002e.8
Looking at device PCI: 00:12.1
Skipping disabled device PCI: 00:12.1
Looking at device PCI: 00:12.2
Looking at device PCI: 00:12.3
Skipping disabled device PCI: 00:12.3
Looking at device PCI: 00:12.4
Skipping disabled device PCI: 00:12.4
Looking at device PCI: 00:12.1
Looking at device PCI: 00:12.2
Looking at device PCI: 00:12.3
Looking at device PCI: 00:12.4
first onboard = PCI: 00:12.4
Looking at device PCI: 00:13.0
Looking at vga_onboard
Yes: PCI: 00:12.4
Reassigning vga to PCI: 00:12.4
Allocating VGA resource PCI: 00:12.4
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io
Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: fd000000 size: 01003080 align: 24 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem
PCI: 00:12.4 10 * [0xfe000000 - 0xfe000fff] mem
PCI: 00:13.0 10 * [0xfe001000 - 0xfe001fff] mem
PCI: 00:12.1 10 * [0xfe002000 - 0xfe0020ff] mem
PCI: 00:12.3 10 * [0xfe003000 - 0xfe00307f] mem
Root Device compute_allocate_mem: base: fe003080 size: 01003080 align: 24 gran:
0 done
Root Device assign_resources, bus 0 link: 0
BC_DRAM_TOP = 0x03bfffff
MC_GBASE_ADD = 0x00000078
I would set ram size to 60 Mbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:09.0 assign_resources, bus 0 link: 0
PCI: 00:12.1 10 <- [0x00fe002000 - 0x00fe0020ff] mem
PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io
PCI: 00:12.3 10 <- [0x00fe003000 - 0x00fe00307f] mem
PCI: 00:12.4 10 <- [0x00fe000000 - 0x00fe000fff] mem
PCI: 00:13.0 10 <- [0x00fe001000 - 0x00fe001fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:09.0 subsystem <- 00/00
PCI: 00:09.0 cmd <- 142
cs5530.c: cs5530_pci_dev_enable_resources()
PCI: 00:12.0 cmd <- 14f
PCI: 00:12.2 missing enable_resources
PCI: 00:12.1 cmd <- 142
PCI: 00:12.2 cmd <- 141
PCI: 00:12.3 cmd <- 142
PCI: 00:12.4 cmd <- 143
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
PCI: 00:09.0 init
PCI: 00:12.0 init
cs5530: southbridge_init
PNP: 002e.0 init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.4 init
PNP: 002e.5 init
PNP: 002e.6 init
PNP: 002e.7 init
PNP: 002e.8 init
PCI: 00:12.1 init
PCI: 00:12.2 init
cs5530_ide: ide_init
PCI: 00:12.3 init
PCI: 00:12.4 init
PCI: 00:13.0 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...failed
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 000006c4 checksum fbee
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
# lspci -vv
00:00.0 0600: 1078:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:09.0 0300: 10ea:5000 (rev 02)
Subsystem: 0202:0202
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 08000000 [disabled] [size=64K]
00:12.0 0601: 1078:0100
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 04
00:12.1 0680: 1078:0101
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe002000 (32-bit, non-prefetchable) [size=256]
00:12.2 0101: 1078:0102 (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at 1000 [size=128]
00:12.3 0401: 1078:0103
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe003000 (32-bit, non-prefetchable) [size=128]
00:12.4 0300: 1078:0104
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
00:13.0 0c03: 0e11:a0f8 (rev 06) (prog-if 10)
Subsystem: 0e11:a0f8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fe001000 (32-bit, non-prefetchable) [size=4K]
#
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
