Ronald G Minnich schrieb:
I hate to say this, but it is time to reset. I think we actually may
understand part of the problem -- the Config.lb is wrong for the mobo.
But you're in a maze of twisty little passages.
Honestly, it's hard to do this, but do a clean checkout, fix up your
Config.lb, and let's try to get a clean serial console trace, and see if
things make more sense.
Sorry this has been so painful. This is really my fault, I bet, since
the config parser is so stupid.
ron
Mmmh, but I get the same as before. ;)
Why should I do this? Ok, I have it done.
Fresh Checkout:
Now I use again the eaglelion/5bcm as target and have taken my old
"fixed" Config.lb. Furthermore I have enabled the CONFIGURE_CONSOLE_VGA
& CONFIGURE_PCI_ROM_RUN in Options.lb
and as I say, I get the same as before ;)
Should I do a run without VGA stuff.
At the moment, I have one problem.
Why fails the emulator? It seems the rest is OK for me.
chris
ÿ
LinuxBIOS-1.1.8.0Fallback Tue Apr 25 19:44:31 CEST 2006 starting...
Setting up default parameters for memory
Sizing memory
Probing for DIMM0
Found DIMM0
Page Size: 00001000
Component Banks: 4
Module Banks: 1
DIMM size: 04000000
Probing for DIMM1
MC_BANK_CFG = 00701420
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8.0Fallback Tue Apr 25 19:44:31 CEST 2006 booting...
end 5d44cc56, start 0
32-bit delta 349
calibrate_tsc 32-bit result is 349
clocks_per_usec: 349
Enumerating buses...
scan_static_bus for Root Device
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1078/0001] ops
PCI: 00:00.0 [1078/0001] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: 00:09.0 [10ea/5000] enabled
PCI: devfn 0x49, bad id 0xffffffff
PCI: devfn 0x4a, bad id 0xffffffff
PCI: devfn 0x4b, bad id 0xffffffff
PCI: devfn 0x4c, bad id 0xffffffff
PCI: devfn 0x4d, bad id 0xffffffff
PCI: devfn 0x4e, bad id 0xffffffff
PCI: devfn 0x4f, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: 00:12.0 [1078/0100] bus ops
southbridge_enable: dev is 00018480
PCI: 00:12.0 [1078/0100] enabled
PCI: 00:12.1 [1078/0101] disabled
PCI: 00:12.2 [1078/0102] ops
cs5530_ide: ide_enable
PCI: 00:12.2 [1078/0102] enabled
PCI: 00:12.3 [1078/0103] disabled
PCI: 00:12.4 [1078/0104] disabled
PCI: devfn 0x95, bad id 0xffffffff
PCI: devfn 0x96, bad id 0xffffffff
PCI: devfn 0x97, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 00020000
malloc 0x00020000
PCI: 00:13.0 [0e11/a0f8] enabled
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:12.0
PNP: 002e.0 enabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
scan_static_bus for PCI: 00:12.0 done
PCI: pci_scan_bus returning with max=00
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io
Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem
PCI: 00:13.0 10 * [0x01000000 - 0x01000fff] mem
Root Device compute_allocate_mem: base: 01001000 size: 01001000 align: 24 gran:
0 done
Done reading resources.
Allocating VGA resource PCI: 00:09.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io
Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0
done
Root Device compute_allocate_mem: base: fd000000 size: 01001000 align: 24 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem
PCI: 00:13.0 10 * [0xfe000000 - 0xfe000fff] mem
Root Device compute_allocate_mem: base: fe001000 size: 01001000 align: 24 gran:
0 done
Root Device assign_resources, bus 0 link: 0
BC_DRAM_TOP = 0x03bfffff
MC_GBASE_ADD = 0x00000078
I would set ram size to 60 Mbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:09.0 30 <- [0x00fffc0000 - 0x00fffcffff] romem
PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io
PCI: 00:13.0 10 <- [0x00fe000000 - 0x00fe000fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:09.0 subsystem <- 00/00
PCI: 00:09.0 cmd <- 143
cs5530.c: cs5530_pci_dev_enable_resources()
PCI: 00:12.0 cmd <- 14f
PCI: 00:12.2 cmd <- 141
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
PCI: 00:09.0 init
rom address for PCI: 00:09.0 = fffc0000
PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x0031
PCI ROM Image, Vendor 10ea, Device 5000,
PCI ROM Image, Class Code 030000, Code Type 00
copying VGA ROM Image from 0xfffc0000 to 0xc0000, 0x8000 bytes
entering emulator
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
