Dear all:
My MB has two cpu (AMD opteron) , chipset is broadcom bcm5780 and bcm5785 ,after I flash my linuxbios ,It hang ,and from minicom ,
we can see the error below(attchment is the whole log ):
PCI: 00:0a.0 [1166/0130] enabled
PCI: 00:0b.0 [1166/0130] enabled
PCI: 00:0c.0 [1166/0132] enabled
PCI: 00:0d.0 [1166/0132] enabled
PCI: 00:0e.0 [1166/0132] enabled
PCI: 00:0f.0 [1166/0132] enabled
PCI: 00: 0a.0
PCI: Left over static devices. Check your Config.lb
PCI: 00:0b.0 [1166/0130] enabled
PCI: 00:0c.0 [1166/0132] enabled
PCI: 00:0d.0 [1166/0132] enabled
PCI: 00:0e.0 [1166/0132] enabled
PCI: 00:0f.0 [1166/0132] enabled
PCI: 00: 0a.0
PCI: Left over static devices. Check your Config.lb
could anyone tell me what is the problem? Thank you very much!
Neil
LinuxBIOS-1.1.8_Fallback Thu May 11 14:53:42 CST 2006 starting... real main sysinfo =000cf000 bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. SBLink=02 NC node|link=02 SMBus controller enabled Ram1.00 Ram1.01 Ram2.00 Registered 200Mhz RAM: 0x00100000 KB Ram2.01 Registered 200Mhz RAM: 0x00200000 KB Ram3 Initializing memory: done Initializing memory: done Setting variable MTRR 02, base: 0000MB, range: 0800MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=06 done DQS Training:RcvrEn:Pass1: 01 CTLRMaxDelay=ae done DQS Training:DQSPos: 00 done DQS Training:DQSPos: 01 DQS Training Rd Wr failed ctrl01 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=38 done DQS Training:RcvrEn:Pass2: 01 CTLRMaxDelay=ae done DQS Training:tsc[00]=00000000251a65f8 DQS Training:tsc[01]=000000002a97a605 DQS Training:tsc[02]=000000003f4c0937 DQS Training:tsc[03]=000000031eb6b53c DQS Training:tsc[04]=0000000320edcf05 Ram4 v_esp=000cefc4 testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to ram. src=fffe0004 dst=00004000 linxbios_ram.bin length = 00022c10 Jumping to LinuxBIOS. LinuxBIOS-1.1.8_Fallback Thu May 11 14:53:42 CST 2006 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: 00:19.3 siblings=1 CPU: APIC: 02 enabled CPU: APIC: 03 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 00:00.0 [1166/0130] enabled PCI: 00:0a.0 [1166/0130] enabled next_unitid: 0010 PCI: 00:00.0 subbordinate bus PCI-X PCI: 00:00.0 [1166/0036] enabled PCI: 00:10.0 [1166/0036] enabled next_unitid: 0015 PCI: pci_scan_bus for bus 00 PCI: 00:04.0 [1002/5159] enabled PCI: 00:06.0 [1166/0036] enabled PCI: 00:07.0 [1166/0205] enabled Disabling static device: PCI: 00:07.1 PCI: 00:07.2 [1166/0234] enabled PCI: 00:07.3 [1166/0238] enabled Disabling static device: PCI: 00:07.4 Disabling static device: PCI: 00:07.5 Disabling static device: PCI: 00:07.6 Disabling static device: PCI: 00:08.0 Disabling static device: PCI: 00:08.1 Disabling static device: PCI: 00:08.2 PCI: 00:0a.0 [1166/0130] enabled PCI: 00:0b.0 [1166/0130] enabled PCI: 00:0c.0 [1166/0132] enabled PCI: 00:0d.0 [1166/0132] enabled PCI: 00:0e.0 [1166/0132] enabled PCI: 00:0f.0 [1166/0132] enabled PCI: 00:0a.0 PCI: Left over static devices. Check your Config.lb
-- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
