|
Comment out several lines about links in
resourcemap.c. Current inherent_ht.c already could probe
the links automatically… amd/Serengeti_leopard is good model. If
you want mptable and irqtable and acpitable create automatically. YH From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vincente Tsou Hello LinuxBios elders, I'm sorry to bother you. I'm begining to study LinuxBios and I have some problem in it. Hope you can give me some idea. My target board is an AMD Opteron (chipset: K8 / 8111 / 8131)
mainboard, it is similar to Tyan s2880 / s2881 / s2882. So I base on Tyan s2880 to change some config file to compile
a linuxbios.rom, but it doesn't work. Following is what do I changed in s2880: 1. I changed the payload path in targets/tyan/s2880/Config.lb. 2. modify src/mainboard/tyan/s2880/Config.lb as 42812-pci.txt. ( as
attachment ) I don't know is it correct that I modified. If you
have interest you can refer to Attachment. 3. generated irq_tables.c by getpir.c and replaced the original one. compile and burn it in rom. After I boot up the target board, it always alert emergency beep. Then, I unmark some debug message in
'src/northbridge/amd/amdk8/raminit.c' to see where is it hang. The last step is hang on setup_default_resource_map() in 'src/mainboard/tyan/s2880/cache_as_ram_auto.c', I can see it from serial console ( as attachment again. ) Is there any configuration I should change, and I didn't do ? How can I debug it ? Thanks a lot.
|
-- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
