Hi, On Tue, Aug 01, 2006 at 01:41:51AM +0200, Stefan Reinauer wrote: > They don't work. You read back ff all the time.
Yes, that's what I was guessing. It should return the vendor and device ID (0xDA, 0x0B), correct? Do the access times matter here? I have a W49F002U-12B, i.e. 120ns, according to the datasheet. > > Attached is the output of ./flashrom -V. It's the same for both the > > AM2* and W49* chips. I had no luck with flash_rom from V1, either. > > The output of that is attached, too. > > I assume it doesnt even try to enable write cycles. This should be > warned in flashrom with an appropriate message to fix it. > > ie on Epia it would say: > Enabling flash write on VT8235...OK I haven't seen such a message here. > Can you send around an lspci -n ? Sure. 00:00.0 0600: 8086:7190 (rev 03) 00:01.0 0604: 8086:7191 (rev 03) 00:07.0 0601: 8086:7110 (rev 02) 00:07.1 0101: 8086:7111 (rev 01) 00:07.2 0c03: 8086:7112 (rev 01) 00:07.3 0680: 8086:7113 (rev 02) 01:00.0 0300: 1039:6326 (rev 0b) Uwe. -- Uwe Hermann http://www.hermann-uwe.de http://www.it-services-uh.de | http://www.crazy-hacks.org http://www.holsham-traders.de | http://www.unmaintained-free-software.org
signature.asc
Description: Digital signature
-- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
