Hello Yinghai Lu, I just tried LinuxBIOSv2 r2452 for my DK8-HTX, and still have the problem with IDE bus timeout (log shown below).
Maybe my FILO Config is not correct, could you send me yours? Thanks, Chris -------------------------------------------------------------------------------------------------- Jumping to boot code at 0x1079b8 FILO version 0.5 ([EMAIL PROTECTED]) Thu Sep 21 16:02:57 CDT 2006 Press <Enter> for default boot, or <Esc> for boot prompt... timed out boot: hda2:/boot/vmlinuz.lb root=/dev/hda2 initrd=/boot/initrd.lb console=ttyS0, 115200 console=tty0 video=atyfb:1024x768-16 Detected floating bus No drive detected on IDE channel 0 > There is one guy post the his patch on the list, can you look at it? > 1. put SB chain on bus0 > 2. sb chain is on link2 in the Config.lb > > I'm asking one MB to verify why CAR is not working. > > Thanks > > Yinghai Lu > > -----Original Message----- > From: Chris Stillo [mailto:[EMAIL PROTECTED] > Sent: Wednesday, September 27, 2006 6:59 PM > To: Lu, Yinghai > Subject: Re: logfile -- dk8_htx_linuxbios_3.rom > > Hello, sorry to bother you again. Any update on this? If you are too > busy, I can repost to the message board to see if anyone else has any > more ideas. > > Thanks, > Chris > >> I don't know why your platform doesn't like to restart while >> > transition > >> from CAR To Ram code. >> >> Can you check the serial Number in your CPU? I'd like to check that >> > cpu > >> in my platform. >> >> Thanks >> >> Yinghai Lu >> >> -----Original Message----- >> From: Chris Stillo [mailto:[EMAIL PROTECTED] >> Sent: Tuesday, September 26, 2006 2:15 PM >> To: Lu, Yinghai >> Subject: Re: logfile -- dk8_htx_linuxbios_3.rom >> >> Hi, >> >> Sorry to bother you. Is there any update on this issue? Is there a >> > file > >> you can recommend I modify? >> >> Thanks, >> Chris >> >> >>> where are you? SF bay area? >>> >>> and what's you company name? pathscale? >>> >>> YH >>> >>> >>> >>> > ------------------------------------------------------------------------ > >> >> >>> *From:* Chris Stillo [mailto:[EMAIL PROTECTED] >>> *Sent:* Fri 9/22/2006 8:22 PM >>> *To:* Lu, Yinghai >>> *Subject:* Re: logfile -- dk8_htx_linuxbios_3.rom >>> >>> >>> Sorry for the delay. I corrupted bootstrap ROM and had to >>> > recover.... > >>> Anyway here is logfile for #3... it loops over and over, I cut it >>> > off. > >>> LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006 >>> >>> >> starting... >> >> >>> bsp_apicid=00 >>> (0,1) link=01 >>> (1,0) link=01 >>> 02 nodes initialized. >>> core0 started: 01 >>> started ap apicid: 01 03 >>> SBLink=02 >>> NC node|link=02 >>> ht reset - >>> >>> >>> LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006 >>> >>> >> starting... >> >> >>> bsp_apicid=00 >>> (0,1) link=01 >>> (1,0) link=01 >>> 02 nodes initialized. >>> core0 started: 01 >>> started ap apicid: 01 03 >>> SBLink=02 >>> NC node|link=02 >>> SMBus controller enabled >>> Ram1.00 >>> Ram1.01 >>> Ram2.00 >>> Ram2.01 >>> Ram3 >>> Initializing memory: done >>> Initializing memory: done >>> Ram4 >>> v_esp=000cfe84 >>> testx = 5a5a5a5a >>> Copying data from cache to ram -- switching to use ram as stack... >>> >>> >> Done >> >> >>> testx = 5a5a5a5a >>> Disabling cache as ram now >>> Clearing initial memory region: >>> >>> >>> INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- >>> >>> Issuing SOFT_RESET... >>> >>> >>> LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 15:04:12 PDT 2006 >>> >>> >> starting... >> >> >>> bsp_apicid=00 >>> (0,1) link=01 >>> (1,0) link=01 >>> 02 nodes initialized. >>> core0 started: 01 >>> started ap apicid: 01 03 >>> SBLink=02 >>> NC node|link=02 >>> SMBus controller enabled >>> Ram1.00 >>> Ram1.01 >>> Ram2.00 >>> Ram2.01 >>> Ram3 >>> Initializing memory: done >>> Initializing memory: done >>> Ram4 >>> v_esp=000cfe84 >>> testx = 5a5a5a5a >>> Copying data from cache to ram -- switching to use ram as stack... >>> >>> >> Done >> >> >>> testx = 5a5a5a5a >>> Disabling cache as ram now >>> Clearing initial memory region: >>> >>> >>> INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- >>> >>> Issuing SOFT_RESET... >>> >>> >>> >>> >>>> -----Original Message----- >>>> From: Chris Stillo [mailto:[EMAIL PROTECTED] >>>> Sent: Friday, September 22, 2006 2:59 PM >>>> To: Lu, Yinghai >>>> Subject: Re: logfile -- dk8_htx_linuxbios_2.rom >>>> >>>> >>>> >>>> LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 13:50:42 PDT 2006 >>>> starting... >>>> bsp_apicid=00 >>>> (0,1) link=01 >>>> (1,0) link=01 >>>> 02 nodes initialized. >>>> core0 started: 01 >>>> 01 02 03SBLink=02 >>>> NC node|link=02 >>>> ht reset - >>>> >>>> >>>> LinuxBIOS-1.1.8_dk8_htx_Fallback Fri Sep 22 13:50:42 PDT 2006 >>>> starting... >>>> bsp_apicid=00 >>>> (0,1) link=01 >>>> (1,0) link=01 >>>> 02 nodes initialized. >>>> core0 started: 01 >>>> 01 02 03SBLink=02 >>>> NC node|link=02 >>>> SMBus controller enabled >>>> Ram1.00 >>>> Ram1.01 >>>> Ram2.00 >>>> Ram2.01 >>>> Ram3 >>>> Initializing memory: done >>>> Initializing memory: done >>>> Ram4 >>>> v_esp=000cfd98 >>>> testx = 5a5a5a5a >>>> Copying data from cache to ram -- switching to use ram as stack... >>>> >>>> >> Done >> >> >>>> testx = 5a5a5a5a >>>> Disabling cache as ram now >>>> Clearing initial memory region: >>>> >>>> >>>> INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} --- >>>> >>>> Issuing SOFT_RESET... >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> >> >> >> >> >> > > > > > > > > -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
