[Forwarding to the list, I guess Li pressed a wrong button.] Li, please use "reply to all".
Begin forwarded message: > From: Li Haiqiang <[EMAIL PROTECTED]> > Date: 6 november 2006 2:39:39 GMT+01:00 > To: Segher Boessenkool <[EMAIL PROTECTED]> > Subject: Re: [LinuxBIOS] Hello, I have a problem to put the > linuxbios on my mainboard ms6163. > > Yes, I have only one memory module. > > The lspci -xxx output: > 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX > Host bridge (rev 03) > 00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00 > 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 0c 8a 00 ff 00 00 00 09 03 10 11 01 00 00 00 00 > 60: 08 10 10 10 10 10 10 10 00 0f c0 00 00 8a 00 00 > 70: 20 1f 0a 38 05 00 03 01 26 ff 10 38 00 00 00 00 > 80: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 98 22 00 00 04 61 00 00 00 05 00 00 00 00 00 00 > a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00 > b0: 80 20 00 00 30 00 00 00 00 00 ef 07 20 10 00 00 > c0: 00 00 00 00 00 00 00 00 18 0c ff ff 67 00 00 00 > d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 > e0: 4c ad ff bb 8a 3e 00 80 2c d3 f7 cf 9d 3e 00 00 > f0: 40 01 00 00 00 f8 00 60 20 0f 00 00 00 00 00 00 > > > > And the LinuxBIOS serial output: > PCI: 00:00.00 > 00: 86 80 90 71 06 00 10 22 03 00 00 06 00 00 00 00 > 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 0 > 50: 04 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 > 60: 01 01 01 01 01 01 01 01 00 00 00 00 00 00 00 00 > 70: 00 1f 02 38 00 00 00 00 00 00 00 38 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 80 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00 > a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 18 0c 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 f8 00 00 20 0f 00 00 00 00 00 00 > > > > > ----- Original Message ---- > From: Segher Boessenkool <[EMAIL PROTECTED]> > To: Stefan Reinauer <[EMAIL PROTECTED]> > Cc: Li Haiqiang <[EMAIL PROTECTED]>; [email protected] > Sent: Monday, November 6, 2006 2:45:19 AM > Subject: Re: [LinuxBIOS] Hello, I have a problem to put the > linuxbios on my mainboard ms6163. > > > You need to run > > dump_pci_devices(); > > > > as last command in auto.c > > > >> lspci -xxx: > > If you resend this lspci output with the dump_pci_devices() > output (and please do!), use lspci -xxx -s0:0 or just > cut'n'paste only device 0 ("Host Bridge"), the rest isn't > interesting. > > Did you send the SPD contents dump already? I didn't see > it yet -- if you didn't send it to the list, please do. > > Oh and answer Stefan's question: > > >> Ok. Its reading 1 SPD-ROM. Do you have 1 memory module > >> installed? If yes: Everything is fine here. If you have more, > >> we need to find out where they are. > > > > Segher > > > -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
