Hi all, I have successfully flash LinuxBIOS on my chip SST39SF020A with flashrom, when I reboot my card, I have no visual response, after that I use an Null modem db9 wire between my card with LinuxBios et my computer. I have use Hyperterminal with parameter 115200 baud, 8bit, no parity, 1 bit stop, and after reboot my card, I have nothing ...
I don't know why, in my config file I have set normally the good line for active the com port in debug mode, but if somebody know all of the modification for check if it's ok, it's welcome ;). thanks by advance for your help. regards Ccases PS : my card is an advantech pcm-5823 -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
