Hello,
I used the buildrom tool, but the norwich board uses the companion
serial and my board uses SUPERIO WINBOND w83267hf. So, I modified the code
of /mainboar/amd/norwich/cache_as_ram_auto.c to work with this chip.
It worked fine, but the boot process stop with :
Before VSA:
do_vsmbios
I'm not including the vsa in the linuxbios.rom, is that the problem?
And how can I concatenate the two files correctly?
Regards,
Otávio Alcântara
On 5/24/07, Otávio Alcântara <[EMAIL PROTECTED]> wrote:
Thanks Marc,
I will try buildrom.
Regards,
Otavio
On 5/23/07, Marc Jones < [EMAIL PROTECTED] > wrote:
>
>
>
> Otávio Alcântara wrote:
> > I used a dissambly and there is no jump in the reset vector. I've
> tried
> > other board (amd rumba, using the same tools JTAG and memory
> > programmer) and it starts normaly the boot process, just don't finish
> it
> > because the processor is a Geode GX and my board is a LX one. I'll try
>
> > the norwich board that is similar to mine.
> > The problem I saw with msm800 is that linuxbios.rom is not on a valid
> > format, the file doesn't size like the ROM_SIZE option of
> > targets/../../Config.lb.
> >
> > Thanks,
> >
> > Otávio
> >
>
>
> Are you using buildrom?
>
> http://linuxbios.org/Buildrom
>
> It is recommended to use it for LX systems. It should handle putting the
>
> VSA image with the LB binary to make the complete image.
> Marc
>
>
>
>
> > On 5/23/07, *ron minnich* < [EMAIL PROTECTED]
> > <mailto: [EMAIL PROTECTED]>> wrote:
> >
> > The first thing I ever do with problems of this type is simple:
> > hexdump romimage
> >
> > and see if I see a jump at end.
> >
> > ron
> >
> >
> >
> >
> > --
> > Otávio Alcântara
> > "I'll never cross to the Dark Side."
> >
>
> --
> Marc Jones
> Senior Software Engineer
> (970) 226-9684 Office
> mailto: [EMAIL PROTECTED]
> http://www.amd.com/embeddedprocessors
>
>
>
--
Otávio Alcântara
"I'll never cross to the Dark Side."
--
Otávio Alcântara
"I'll never cross to the Dark Side."
--
linuxbios mailing list
[email protected]
http://www.linuxbios.org/mailman/listinfo/linuxbios
