Marc Jones wrote: > > Steffen D. wrote: >> About the ethernet problem: >> ------- >> meshnode:~# modprobe r8169 >> r8169 Gigabit Ethernet driver 2.2LK loaded >> PCI: Guessed IRQ 11 for device 0000:00:0d.0 >> PCI: Sharing IRQ 11 with 0000:00:0f.3 >> eth0: RTL8169sb/8110sb at 0xd0016000, 00:08:ee:00:ee:1c, IRQ 11 >> ------- >> this also seems very strange "sharing irq11 with..." can the problem be >> right here? > > That shouldn't be the issue. I recall now that PIRQB is shared with the > audio device. d.0 is the eth0 and f.3 is audio. > > Marc > >
OK. I think is see the problem. Bus Master Enable and Memory Enable aren't enabled in the command register. I am not sure why the Memory Enable isn't set. LinuxBIOS should set that and this seems to be a problem in the LB generic pci init code (Anyone care to debug this?). I think that the driver should enable the Bus Master and LB shouldn't need to touch it (I would be interested in other opinions on this). Try: >setpci 00:0d.0 COMMAND=7 Marc -- Marc Jones Senior Firmware Engineer (970) 226-9684 Office mailto:[EMAIL PROTECTED] http://www.amd.com/embeddedprocessors -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
