I propose: $(LB)/src/mainboard/gigabyte/m57sli/cache_as_ram_auto.c 138c138 < RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ --- > RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x68,/* GPIO39 PCI_GNT3 */ \
My vga pci card and a pci network card are recognised with this under LinuxBIOS! I don't understand why this works, but it works.. (I will explain tomorrow how I found this value) Please can someone validate my change? Regards, Florentin Quoting [EMAIL PROTECTED]: > Hi, > > Quoting yhlu <[EMAIL PROTECTED]>: > > > On 9/25/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > > Hi, > > > This fix still doesn't work for m57sli v2.0.. > > > As promised, I send a log with : > > > - full debugging log in LinuxBIOS; > > > > Please only set log_level to 8... > > > > > - Linux boot messages; > > > - the result of a "lspci -vvv" command (inclused at the end of the file > <= > > the > > > test was done with the PCI VGA card installed into a PCI slot); > > lspci -vvxxx > > lspci -tv > > are good. > > Please find the results of these commands in the attached files (done with a > updated version of LinuxBIOS - i.e. after your patch was applied) > I add the result of the command "lspci -xxx" under the award bios for > reference.. > > > > - the result of the command "setpci -s 00:01.0 78.l" > > ?, you already did that in LinuxBIOS? > > Sorry I don't understand the question.. Do you mean that "setpci" was > executed > after I updated LB? Yes, it was!.. > > Florentin > -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
