Hi Andi,
On 10.11.2007 09:45, Andreas B. Mundt wrote:
> is it possible that there is no change at all in superiotool output?
>
Superiotool output should have changed for LDN 0x7 and NOLDN (the
registers before LDN 0x0), the rest should be identical to the output
before.
> Or did I not propperly clean my build tree? (I did a ./buildtarget in the
> target directory after patching and a make clean prior to building as usual).
>
Try to "rm -r gigabyte/m57sli/m57sli", then run buildtarget again, then
run "grep -r base=0x800 gigabyte/m57sli/m57sli". This should give you
three lines if the patch was applied correctly.
> ./targets/gigabyte/m57sli/m57sli/failover/static.c: {
> .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> .index=0x62, .base=0x800},
> ./targets/gigabyte/m57sli/m57sli/fallback/static.c: {
> .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> .index=0x62, .base=0x800},
> ./targets/gigabyte/m57sli/m57sli/normal/static.c: {
> .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> .index=0x62, .base=0x800},
Regards,
Carl-Daniel
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
