On Sat, Nov 10, 2007 at 12:43:39PM +0100, Carl-Daniel Hailfinger wrote:
>
> Try to "rm -r gigabyte/m57sli/m57sli", then run buildtarget again, then
> run "grep -r base=0x800 gigabyte/m57sli/m57sli". This should give you
> three lines if the patch was applied correctly.
> > ./targets/gigabyte/m57sli/m57sli/failover/static.c: {
> > .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> > .index=0x62, .base=0x800},
> > ./targets/gigabyte/m57sli/m57sli/fallback/static.c: {
> > .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> > .index=0x62, .base=0x800},
> > ./targets/gigabyte/m57sli/m57sli/normal/static.c: {
> > .flags=IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO,
> > .index=0x62, .base=0x800},
>
Hi Carl-Daniel,
I tried as you suggested and checked it, but still no difference in
superiotool output compared to standard LB!
I found that I am not able to boot the "Normal" image (after using lxbios),
but I guess this is unrelated as the "fallback" image should have the
changes as well.
So far,
Andi
--
linuxbios mailing list
linuxbios@linuxbios.org
http://www.linuxbios.org/mailman/listinfo/linuxbios
