Am Montag, 12. November 2007 12:30:33 schrieb Carl-Daniel Hailfinger: > On 08.11.2007 15:05, LinuxBIOS wrote: > > #87: flashrom issues on m57sli-s4 > > -------------------------+----------------------------------------------- > >--- Reporter: ward | Owner: hailfinger > > Type: defect | Status: new > > Priority: major | Milestone: > > Component: flashrom | Version: v2 > > Resolution: | Keywords: > > Dependencies: | Patchstatus: there is no patch > > -------------------------+----------------------------------------------- > >--- Changes (by hailfinger): > > > > * owner: somebody => hailfinger > > > > Comment: > > > > I need superiotool output for a board with parallel flash running under > > LB. NOW. > > > > AFAICS the flash configuration is totally botched on LB with floating > > GPIOs, wrong timing etc. > > > > I have a patch pending which will solve the flashing problem on all > > M57SLI boards, but I refuse to send it to the list before I have > > superiotool output to verify. > > Since trac seems to be down, this message goes to the list: > > Flashing parallel flash is fixed in r2955. > > To be able to autodetect presence of serial flash, I'd like full > superiotool output for > * board with parallel flash > * board with serial flash here is the output form superiotool for a board with serial flash. flashrom under lb fails on detecting the SPI part. (sry, but i don't know the detailed error message any more.)
> both running LinuxBIOS r2955 or later. > I hope to find a bit which differs in superio configuration that can be > used to select the right code path for enabling SPI flash (decode and > flash functionality). > > Regards, > Carl-Daniel regards, harald -- linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios
