I ended up only sending this to Eric... I seem to do that a lot. My reply and reply to all menu selections are just too close together I guess. Anyway heres the list's copy.
On 10 May 2002 01:14:36 -0600, Eric W. Biederman wrote: >> >scope, or even your board. It might be a bug in the software. Can you >> >send me a copy of your code, off list? And thanks. >> >> I haven't changed anything. It's the stock stuff from linuxbios CVS. > >Dumb question which code from linuxbios CVS? There are several i2c >drivers. Hmmmm... Perhaps not so dumb since I don't really know how to answer. Lets say its the i2c-code-from-CVS-for-the-440bx-chipset. freebios/src/northbridge/intel/440bx/raminit.inc is where it lives. Of course on the 440bx the actual i2c bridge is in the southbridge. I'm assuming that the PCI reads are working correctly because if the devfunction isn't set properly then the code hangs wating for the ready bit to go active. Perhaps I need to read a few other registers and see if I get back the right data. The status read could be a fluke. -- Richard A. Smith Bitworks, Inc. [EMAIL PROTECTED] 501.846.5777 x204 Sr. Design Engineer http://www.bitworks.com
