On 09/14/2005 12:19 PM, Richard Smith wrote: >>256, when i flash the stock 256k image onto the 512k chip it will not >>boot. No clue as to why. This could be a function of my programmer, not >>sure. > > > Duplicate the image into both of halfs of the 512k chip. Whats > probally happening is that the additional address line on the 512k > chip is not pulled down on the board so its floating and your chip is > selecting addresses in the unprogrammed area of the chip. If you dup > the image then it won't matter what the floating address line is > doing. > > That is as long as the line dosn't float into the "undefined" range > and cause a latchup. >
You are clever. That worked. At least one time anyway. :) Good, I can finally give linuxbios a go. First to try flash & burn now. Jeff -- LinuxBIOS mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
