Have you guy's looked at this as a replacement?
http://www.loet.de/flasher_en.html
-Adam
Jeff Carr wrote:
On 09/14/2005 12:19 PM, Richard Smith wrote:
256, when i flash the stock 256k image onto the 512k chip it will not
boot. No clue as to why. This could be a function of my programmer, not
sure.
Duplicate the image into both of halfs of the 512k chip. Whats
probally happening is that the additional address line on the 512k
chip is not pulled down on the board so its floating and your chip is
selecting addresses in the unprogrammed area of the chip. If you dup
the image then it won't matter what the floating address line is
doing.
That is as long as the line dosn't float into the "undefined" range
and cause a latchup.
You are clever. That worked. At least one time anyway. :)
Good, I can finally give linuxbios a go. First to try flash & burn now.
Jeff
--
LinuxBIOS mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
