swapnil kamble wrote:
.... I want
to configure my BSNL Broadband on Suse10 . So is there anyone who has
done it, or know how to do it please reply me.
I had made this note some time back for the lug site. It may be useful
to you. It is related to MTNL's broadband so use equivalent conventions.
Regards,
Rony.
************************************************************
Setting Up MTNL TRIBAND In Linux.
By. Rony Bill
MTNL's Triband service comes with an ADSL modem that is supplied with
the broadband connection and this note is intended to help and encourage
those triband users to use this service in Linux.
The ADSL modem comes with two ports, USB and Ethernet. The USB interface
has drivers only for the Windows(R) operating system so the only choice
for connecting the modem in Linux is the ethernet port using the
ethernet/LAN cable that is supplied with the modem. The ADSL modem has a
built-in DHCP server so the ethernet card in the Linux box can be setup
with a Static IP address or a Dynamic IP address which will be provided
by the modem's DHCP server.
Using Static IP Address:-
For this type of setup, use an IP address within the range 192.168.1.2
to 192.168.1.254 Please note that 192.168.1.1 is reserved for the modem
which will be the ethernet's gateway. Here are the IP address settings
given below.
IP Address : 192.168.1.X
Subnet Mask : 255.255.255.0
Default Gateway: 192.168.1.1
Edit your file /etc/resolv.conf to manually add the two entries given below.
nameserver 203.94.227.70
nameserver 203.94.243.70
Now restart your computer and you will be ready to surf the net.
Using Dynamic IP Address (DHCP):-
Simply enable DHCP for your ethernet card. Restart your computer. Your
IP address, subnet mask and default gateway will be automatically set.
However your DNS server entries will be 192.168.1.1. This is because the
ADSL modem itself supplies a DNS server address of 192.168.1.1. This
will not allow you to open websites as your DNS will not work. Open a
web browser that has javascript and cookies enabled. Type 192.168.1.1 in
your address bar and hit enter. Enter your login name and password and
you will be taken to your modem's settings. By default they are 'admin'
and 'admin'. Go to Home > DHCP. In this window, locate the setting DNS
Mode --> Auto or Manual. Select Manual and enter 203.94.227.70 for
Primary DNS and 203.94.243.70 for Secondary DNS.
Go to Tools > System and click the button 'Save and Reboot'. Once your
modem has rebooted properly, reboot your system. Now any Linux box with
DHCP is ready to surf the net.
For extra security, please login to the MTNL website and change your
default password for your user name that is your Telephone number. Then
register this change in your modem's settings by logging into
192.168.1.1 and go to Advanced > ATM VCC and locate the entry Username
that is your Telepphone number. Change the password below to the new
password you created on the MTNL website. Click on the 'Apply' button.
Go to Tools > Admin and change your admin password too for more
security. Click on the 'Apply' button. Once the changes are made go to
Tools > System and click 'Save and Reboot'. Reboot your system now.
Enabling the Firewall:-
The ADSL modem also has a built-in firewall that is disabled by default.
To enable it, log into your modem at 192.168.1.1 and go to Advanced >
Firewall and tick mark all the entries that you would not use from the
internet. Go to ATM VCC and in the Firewall option select 'Enabled'. Go
to Tolls > System and click 'Save and Reboot'. Reboot your system.
Now you are all set for a mode safe and secure internet usage.
*****************************************************
___________________________________________________________
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com
--
http://mm.glug-bom.org/mailman/listinfo/linuxers
