**************************************** * LUG meet on 12 Jan. 2003 @ VJTI ****************************************
Hello, I am encountering an strange problem with cdrecord. The error message generated using xcdroast is attached at the end of the mail. And the strange thing is sometime it works and sometime it gives this error. Moreover rebooting have no effect on the behaviour. Any sugestion, recomendation. I am using packages of RH 7.2 (complete installation). Thanks Hemang Ajmera -------------------------Error Message---------------------------------- Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" fs=4096k -v -useinfo speed=8 -dao -eject -pad -data "/home/project/hemang/t3.img" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.19 pregap1: -1 Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SAMSUNG ' Identifikation : 'CDRW/DVD SM-308B' Revision : 'T100' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1578192 = 1541 KB FIFO size : 4194304 = 4096 KB Track 01: data 698 MB padsize: 30 KB Total size: 802 MB (79:27.77) = 357583 sectors Lout start: 802 MB (79:29/58) = 357583 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11524 (97:28/26) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 13 Manufacturer: Multi Media Masters & Machinary SA Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2266 Starting to write CD/DVD at speed 8 in write mode for single session. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... cdrecord: Input/output error. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 10.797s timeout 200s cdrecord: Resource temporarily unavailable. OPC failed. -- _______________________________________________ http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
