Enable settings to target L2 for the first few cachelines of the packet,
since we'll access them to get to the various headers.
Signed-off-by: Olof Johansson <[EMAIL PROTECTED]>
Index: netdev-2.6/drivers/net/pasemi_mac.c
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.c
+++ netdev-2.6/drivers/net/pasemi_mac.c
@@ -216,7 +216,7 @@ static int pasemi_mac_setup_rx_resources
PAS_DMA_RXCHAN_BASEU_SIZ(RX_RING_SIZE >> 2));
write_dma_reg(mac, PAS_DMA_RXCHAN_CFG(chan_id),
- PAS_DMA_RXCHAN_CFG_HBU(1));
+ PAS_DMA_RXCHAN_CFG_HBU(2));
write_dma_reg(mac, PAS_DMA_RXINT_BASEL(mac->dma_if),
PAS_DMA_RXINT_BASEL_BRBL(__pa(ring->buffers)));
@@ -225,6 +225,9 @@ static int pasemi_mac_setup_rx_resources
PAS_DMA_RXINT_BASEU_BRBH(__pa(ring->buffers) >> 32) |
PAS_DMA_RXINT_BASEU_SIZ(RX_RING_SIZE >> 3));
+ write_dma_reg(mac, PAS_DMA_RXINT_CFG(mac->dma_if),
+ PAS_DMA_RXINT_CFG_DHL(2));
+
ring->next_to_fill = 0;
ring->next_to_clean = 0;
Index: netdev-2.6/drivers/net/pasemi_mac.h
===================================================================
--- netdev-2.6.orig/drivers/net/pasemi_mac.h
+++ netdev-2.6/drivers/net/pasemi_mac.h
@@ -218,6 +218,14 @@ enum {
#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000
#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000
#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17
+#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE)
+#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000
+#define PAS_DMA_RXINT_CFG_DHL_S 24
+#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
+ PAS_DMA_RXINT_CFG_DHL_M)
+#define PAS_DMA_RXINT_CFG_WIF 0x00000002
+#define PAS_DMA_RXINT_CFG_WIL 0x00000001
+
#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE)
#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff
#define PAS_DMA_RXINT_INCR_INCR_S 0
--
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
