On Fri, 20 Jul 2007, Segher Boessenkool wrote:

> > +           strncpy(info->driver_name, i2c_devices[i].i2c_driver,
> > KOBJ_NAME_LEN);
> > +           strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE);
> 
> Why not just strcpy(), btw?

Because target strings are finite length, and sources are just pointers to 
some constant strings, which one might make arbitrarily long.

> > +           addr = of_get_property(node, "reg", &len);
> > +           if (!addr || len < sizeof(int) || *addr > 0xffff)
> > +                   continue;
> 
> Give a warning when the addr won't fit in 16 bits?

Ok, version 3, hopefully last, below.

Thanks
Guennadi
---
Guennadi Liakhovetski

Scan the device tree for i2c devices, check their "compatible" property
against a hard-coded table, and, if found, register with i2c boardinfo.

Signed-off-by: G. Liakhovetski <[EMAIL PROTECTED]>

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3289fab..727453d 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -305,6 +305,64 @@ err:
 
 arch_initcall(gfar_of_init);
 
+#ifdef CONFIG_I2C_BOARDINFO
+#include <linux/i2c.h>
+struct i2c_driver_device {
+       char    *of_device;
+       char    *i2c_driver;
+       char    *i2c_type;
+};
+
+static struct i2c_driver_device i2c_devices[] __initdata = {
+       {"ricoh,rs5c372a", "rtc-rs5c372", "rs5c372a",},
+       {"ricoh,rs5c372b", "rtc-rs5c372", "rs5c372b",},
+       {"ricoh,rv5c386",  "rtc-rs5c372", "rv5c386",},
+       {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",},
+};
+
+static int __init of_find_i2c_driver(struct device_node *node, struct 
i2c_board_info *info)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
+               if (!of_device_is_compatible(node, i2c_devices[i].of_device))
+                       continue;
+               strncpy(info->driver_name, i2c_devices[i].i2c_driver, 
KOBJ_NAME_LEN);
+               strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE);
+               return 0;
+       }
+       return -ENODEV;
+}
+
+static void __init of_register_i2c_devices(struct device_node *adap_node, int 
bus_num)
+{
+       struct device_node *node = NULL;
+
+       while ((node = of_get_next_child(adap_node, node))) {
+               struct i2c_board_info info;
+               const u32 *addr;
+               int len;
+
+               addr = of_get_property(node, "reg", &len);
+               if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+                       printk(KERN_WARNING "fsl_ioc.c: invalid i2c device 
entry\n");
+                       continue;
+               }
+
+               info.irq = irq_of_parse_and_map(node, 0);
+               if (info.irq == NO_IRQ)
+                       info.irq = -1;
+
+               if (of_find_i2c_driver(node, &info) < 0)
+                       continue;
+
+               info.platform_data = NULL;
+               info.addr = *addr;
+
+               i2c_register_board_info(bus_num, &info, 1);
+       }
+}
+
 static int __init fsl_i2c_of_init(void)
 {
        struct device_node *np;
@@ -349,6 +407,8 @@ static int __init fsl_i2c_of_init(void)
                                                    fsl_i2c_platform_data));
                if (ret)
                        goto unreg;
+
+               of_register_i2c_devices(np, i);
        }
 
        return 0;
@@ -360,6 +420,7 @@ err:
 }
 
 arch_initcall(fsl_i2c_of_init);
+#endif
 
 #ifdef CONFIG_PPC_83xx
 static int __init mpc83xx_wdt_init(void)
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to