From: Randy Vinson <[EMAIL PROTECTED]>
Setting the host bridge @8000 as primary. Also fixing a bug in
setting the USB interrupt numbers.
Signed-off-by: Randy Vinson <[EMAIL PROTECTED]>
Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/85xx/mpc85xx_cds.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 902a61a..3421d60 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -129,7 +129,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev
*dev)
/* There are two USB controllers.
* Identify them by functon number
*/
- if (PCI_FUNC(dev->devfn))
+ if (PCI_FUNC(dev->devfn) == 3)
dev->irq = 11;
else
dev->irq = 10;
@@ -297,10 +297,10 @@ static void __init mpc85xx_cds_setup_arch(void)
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
- if ((rsrc.start & 0xfffff) == 0x9000)
- fsl_add_bridge(np, 0);
- else
+ if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
}
ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
--
1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
