On Mon, 30 Jul 2007 19:14:45 +0400
> +#define SPRN_CCR1 0x378
> +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
> +{
> + u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
> + u32 reg;
> + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x000F0000) >> 16;
> + fwdva = tmp ? tmp : 16;
> + tmp = (reg & 0x00000700) >> 8;
> + fwdvb = tmp ? tmp : 8;
> + tmp = (reg & 0x1F000000) >> 24;
> + fbdv = tmp ? tmp : 32;
> + lfbdv = (reg & 0x0000007F);
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + opbdv0 = tmp ? tmp : 4;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x07000000) >> 24;
> + perdv0 = tmp ? tmp : 8;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x07000000) >> 24;
> + prbdv0 = tmp ? tmp : 8;
> +
> + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + spcid0 = tmp ? tmp : 4;
> +
> + /* Calculate M */
> + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
> + reg = mfdcr(DCRN_CPR0_DATA);
> + tmp = (reg & 0x03000000) >> 24;
> + if (tmp == 0) { /* PLL output */
> + tmp = (reg & 0x20000000) >> 29;
> + if (!tmp) /* PLLOUTA */
> + m = fbdv * lfbdv * fwdva;
> + else
> + m = fbdv * lfbdv * fwdvb;
> + }
> + else if (tmp == 1) /* CPU output */
> + m = fbdv * fwdva;
> + else
> + m = perdv0 * opbdv0 * fwdvb;
> +
> + vco = (m * sysclk) + (m >> 1);
> + cpu = vco / fwdva;
> + plb = vco / fwdvb / prbdv0;
> + opb = plb / opbdv0;
> + ebc = plb / perdv0;
> +
> + /* FIXME */
> + uart0 = ser_clk;
> +
> + /* Figure out timebase. Either CPU or default TmrClk */
> + asm volatile (
> + "mfspr %0,%1\n"
> + :
> + "=&r"(reg) : "i"(SPRN_CCR1));
> + if (reg & 0x0080)
> + tb = 25000000; /* TmrClk is 25MHz */
> + else
> + tb = cpu;
> +
> + dt_fixup_cpu_clocks(cpu, tb, 0);
> + dt_fixup_clock("/plb", plb);
> + dt_fixup_clock("/plb/opb", opb);
> + dt_fixup_clock("/plb/opb/ebc", ebc);
> + dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
> + dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
> + dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
> + dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
> +}
We don't need to duplicate this function in two different wrappers.
I'll move it into 4xx.c in my next round of patches, so that bamboo and
sequoia can just call a common function.
> +/*
> + * 440EPx DDR1/2 memory controller code
> + * TODO: move to generic 44x code
> + */
> +
> +/* DDR0_02 */
> +#define DDR_START 0x1
> +#define DDR_START_SHIFT 0
> +#define DDR_MAX_CS_REG 0x3
> +#define DDR_MAX_CS_REG_SHIFT 24
> +#define DDR_MAX_COL_REG 0xf
> +#define DDR_MAX_COL_REG_SHIFT 16
> +#define DDR_MAX_ROW_REG 0xf
> +#define DDR_MAX_ROW_REG_SHIFT 8
> +/* DDR0_08 */
> +#define DDR_DDR2_MODE 0x1
> +#define DDR_DDR2_MODE_SHIFT 0
> +/* DDR0_10 */
> +#define DDR_CS_MAP 0x3
> +#define DDR_CS_MAP_SHIFT 8
> +/* DDR0_14 */
> +#define DDR_REDUC 0x1
> +#define DDR_REDUC_SHIFT 16
> +/* DDR0_42 */
> +#define DDR_APIN 0x7
> +#define DDR_APIN_SHIFT 24
> +/* DDR0_43 */
> +#define DDR_COL_SZ 0x7
> +#define DDR_COL_SZ_SHIFT 8
> +#define DDR_BANK8 0x1
> +#define DDR_BANK8_SHIFT 0
> +
> +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
> +
> +static void ibm440epx_fixup_memsize(void)
And we should move this at the same time. Isn't denali used by another
CPU as well?
josh
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
