The built-in IDE controller is configured in legacy mode,
but the PCI registers advertise native mode.
Force the PCI class into legacy mode. This allows pata_via to access
two drives.
The Pegasos specific irq enforcement in the via82cxxx driver
can be removed.
Tested on Pegasos2 with firmware version 20040810, and two IDE disks.
Signed-off-by: Olaf Hering <[EMAIL PROTECTED]>
---
arch/powerpc/kernel/prom_init.c | 11 ++++++++---
arch/powerpc/platforms/chrp/pci.c | 28 ++++++++++++++++++++++++++++
drivers/ide/pci/via82cxxx.c | 7 -------
3 files changed, 36 insertions(+), 10 deletions(-)
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2041,6 +2041,7 @@ static void __init fixup_device_tree_map
/*
* Pegasos and BriQ lacks the "ranges" property in the isa node
* Pegasos needs decimal IRQ 14/15, not hexadecimal
+ * Pegasos has the IDE configured in legacy mode, but advertised as native
*/
static void __init fixup_device_tree_chrp(void)
{
@@ -2078,9 +2079,13 @@ static void __init fixup_device_tree_chr
prom_printf("Fixing up IDE interrupt on Pegasos...\n");
prop[0] = 14;
prop[1] = 0x0;
- prop[2] = 15;
- prop[3] = 0x0;
- prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32));
+ prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32));
+ prom_printf("Fixing up IDE class-code on Pegasos...\n");
+ rc = prom_getprop(ph, "class-code", prop, sizeof(u32));
+ if (rc == sizeof(u32)) {
+ prop[0] &= ~0x5;
+ prom_setprop(ph, name, "class-code", prop, sizeof(u32));
+ }
}
}
#else
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -338,3 +338,31 @@ void chrp_pci_fixup_winbond_ata(struct p
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
chrp_pci_fixup_winbond_ata);
+
+/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
+ * in legacy mode, but sets the PCI registers to PCI native mode.
+ * The chip can only operate in legacy mode, so force the PCI class into legacy
+ * mode as well. The same fixup must be done to the class-code property in
+ * the IDE node /[EMAIL PROTECTED]/[EMAIL PROTECTED],1
+ */
+static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
+{
+ u8 progif;
+ struct pci_dev *viaisa;
+
+ if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
+ return;
+ if (viaide->irq != 14)
+ return;
+
+ viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231,
NULL);
+ if (!viaisa)
+ return;
+ printk("Fixing VIA IDE, force legacy mode on '%s'\n",
viaide->dev.bus_id);
+
+ pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
+
+ pci_dev_put(viaisa);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
chrp_pci_fixup_vt8231_ata);
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -436,13 +436,6 @@ static void __devinit init_hwif_via82cxx
hwif->tuneproc = &via82cxxx_tune_drive;
hwif->speedproc = &via_set_drive;
-
-#ifdef CONFIG_PPC_CHRP
- if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
- hwif->irq = hwif->channel ? 15 : 14;
- }
-#endif
-
for (i = 0; i < 2; i++) {
hwif->drives[i].io_32bit = 1;
hwif->drives[i].unmask = (vdev->via_config->flags &
VIA_NO_UNMASK) ? 0 : 1;
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
