Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.

Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.

The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.

Signed-off-by: Koichiro Den <[email protected]>
---
 drivers/pci/endpoint/pci-epc-core.c |  8 ++++++++
 include/linux/pci-epc.h             |  4 ++++
 include/linux/pci-epf.h             | 27 +++++++++++++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/drivers/pci/endpoint/pci-epc-core.c 
b/drivers/pci/endpoint/pci-epc-core.c
index ca7f19cc973a..068155819c57 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -596,6 +596,14 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 
vfunc_no,
        if (!epc_features)
                return -EINVAL;
 
+       if (epf_bar->num_submap && !epf_bar->submap)
+               return -EINVAL;
+
+       if (epf_bar->num_submap &&
+           !(epc_features->dynamic_inbound_mapping &&
+             epc_features->subrange_mapping))
+               return -EINVAL;
+
        if (epc_features->bar[bar].type == BAR_RESIZABLE &&
            (epf_bar->size < SZ_1M || (u64)epf_bar->size > (SZ_128G * 1024)))
                return -EINVAL;
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 4c8516756c56..c021c7af175f 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -227,6 +227,9 @@ struct pci_epc_bar_desc {
  *                           inbound mappings for an already configured BAR
  *                           (i.e. allow calling pci_epc_set_bar() again
  *                           without first calling pci_epc_clear_bar())
+ * @subrange_mapping: indicate if the EPC device can map inbound subranges for 
a
+ *                    BAR. This feature depends on @dynamic_inbound_mapping
+ *                    feature.
  * @msi_capable: indicate if the endpoint function has MSI capability
  * @msix_capable: indicate if the endpoint function has MSI-X capability
  * @intx_capable: indicate if the endpoint can raise INTx interrupts
@@ -236,6 +239,7 @@ struct pci_epc_bar_desc {
 struct pci_epc_features {
        unsigned int    linkup_notifier : 1;
        unsigned int    dynamic_inbound_mapping : 1;
+       unsigned int    subrange_mapping : 1;
        unsigned int    msi_capable : 1;
        unsigned int    msix_capable : 1;
        unsigned int    intx_capable : 1;
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 48f68c4dcfa5..46f817da6e24 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -110,6 +110,26 @@ struct pci_epf_driver {
 
 #define to_pci_epf_driver(drv) container_of_const((drv), struct 
pci_epf_driver, driver)
 
+/**
+ * struct pci_epf_bar_submap - BAR subrange for inbound mapping
+ * @phys_addr: target physical/DMA address for this subrange
+ * @size: the size of the subrange to be mapped
+ *
+ * When pci_epf_bar.num_submap is >0, pci_epf_bar.submap describes the
+ * complete BAR layout. This allows an EPC driver to program multiple
+ * inbound translation windows for a single BAR when supported by the
+ * controller. The array order defines the BAR layout (submap[0] at offset
+ * 0, and each immediately follows the previous one).
+ *
+ * Note that the subranges:
+ * - must be non-overlapping
+ * - must exactly cover the BAR (i.e. no holes)
+ */
+struct pci_epf_bar_submap {
+       dma_addr_t      phys_addr;
+       size_t          size;
+};
+
 /**
  * struct pci_epf_bar - represents the BAR of EPF device
  * @phys_addr: physical address that should be mapped to the BAR
@@ -119,6 +139,9 @@ struct pci_epf_driver {
  *            requirement
  * @barno: BAR number
  * @flags: flags that are set for the BAR
+ * @num_submap: number of entries in @submap
+ * @submap: array of subrange descriptors allocated by the caller. See
+ *          struct pci_epf_bar_submap for the restrictions in detail.
  */
 struct pci_epf_bar {
        dma_addr_t      phys_addr;
@@ -127,6 +150,10 @@ struct pci_epf_bar {
        size_t          mem_size;
        enum pci_barno  barno;
        int             flags;
+
+       /* Optional sub-range mapping */
+       unsigned int    num_submap;
+       struct pci_epf_bar_submap       *submap;
 };
 
 /**
-- 
2.51.0


Reply via email to