Anybody else seeing USB problems in the 2.6.28 kernels? The warp has a USB 1.1 port off the 440EP processor.
In 2.6.26 we had some problems with certain USB keys, but 2.6.27 fixed it. However, the 2.6.28 stream broke it again before rc1. We get this twice when you try to use the usb key: sd 0:0:0:0: [sda] 990865 512-byte hardware sectors: (507 MB/483 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 sd 0:0:0:0: timing out command, waited 60s It then seems to work. I haven't looked into it too much since we aren't switching to 2.6.28 anytime soon (it breaks our Secure Digital card driver). But I am hoping somebody might know a quick fix... something like "have you got CONFIG_x set" type answer ;) Cheers, Sean _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
