On Sat, 2008-11-15 at 14:42 -0500, Sean MacLennan wrote: > Anybody else seeing USB problems in the 2.6.28 kernels? The warp has a > USB 1.1 port off the 440EP processor. > > In 2.6.26 we had some problems with certain USB keys, but 2.6.27 fixed > it. However, the 2.6.28 stream broke it again before rc1. We get this > twice when you try to use the usb key:
Please reports this to the linux-usb mailing list ! (You can keep this list on CC but the main people capable to help you are over there) Cheers, Ben. > sd 0:0:0:0: [sda] 990865 512-byte hardware sectors: (507 MB/483 MiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Assuming drive cache: write through > sda: sda1 > sd 0:0:0:0: [sda] Attached SCSI removable disk > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > usb 1-1: reset full speed USB device using ppc-of-ohci and address 2 > sd 0:0:0:0: timing out command, waited 60s > > It then seems to work. I haven't looked into it too much since we > aren't switching to 2.6.28 anytime soon (it breaks our Secure Digital > card driver). > > But I am hoping somebody might know a quick fix... something like "have > you got CONFIG_x set" type answer ;) > > Cheers, > Sean > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
